Home

PALU Cleaner 1 l
Liquid for washing and degreasing the nail plate and washing the dispersion layer. Enriched with a fragrance composition.    ◉ degreases without drying the nail plate    ◉ has a pleasant, slightly cherry scent    ◉ very efficient    ◉ product intended for professional use    ◉ capacity: 1LHOW TO USE:Soak a dust-free cotton pad with CLEANER and wipe each nail. Apply successive layers of hybrid manicure: base, color and top. After finishing with the sticky dispersion layer, wipe the top with a cotton pad soaked in CLEANER until the dispersion layer disappears completelyIngredients/ (INCI):Isopropyl Alcohol, Aqua, Parfum, Citral, Linalool, Cinnamal, Alpha-Isomethyl Ionone, Limonene, Eugenol.

PALU Cleaner 500 ml
Liquid for washing and degreasing the nail plate and washing the dispersion layer. Enriched with a fragrance composition.    ◉ degreases without drying the nail plate    ◉ has a pleasant, slightly cherry scent    ◉ very efficient    ◉ product intended for professional use    ◉ capacity: 500 mlHOW TO USE:Soak a dust-free cotton pad with CLEANER and wipe each nail. Apply successive layers of hybrid manicure: base, color and top. After finishing with the sticky dispersion layer, wipe the top with a cotton pad soaked in CLEANER until the dispersion layer disappears completelyIngredients/ (INCI):Isopropyl Alcohol, Aqua, Parfum, Citral, Linalool, Cinnamal, Alpha-Isomethyl Ionone, Limonene, Eugenol.

MANI KING Cleaner 1L
The cleaner is perfect for degreasing the nail plate after it has been dulled - it is enough to wipe the plate with a dust-free cotton swab soaked in the cleanser to prepare the nails for the application of the primer, base and varnish.You can also use the cleaner at the end of the manicure to remove the dispersion layer left over from the previously used products.      Attention
The preparation may cause irritation to the eyes, skin and respiratory system. In case of irritation - rinse with plenty of water and consult a doctor. Store in a dry, cool place. Protect against sunlight. Keep away from children. The product is for professional use only.Use in well-ventilated rooms.Do not use on irritated skin.

PALU Primer /10g
Acid primer:The acid preparation ensures high adhesion. Prevents nails from detaching. Recommended mainly for problematic nail plate, under acrylic styling.HOW TO USE:Apply a small amount to the matted nail plate, wait about 30 seconds for the preparation to evaporate.

PALU Builder Gel Clear/30g
Colorless single-phase gel, designed to extend the natural nail plate on the form or tips. Thanks to its thick, self-leveling consistency, it is easy to apply.    ◉ color: colorless    ◉ consistency: thick    ◉ self-levelling    ◉ Provides good adhesion and lasting shine    ◉ creates a hard coating, resistant to crushing    ◉ easy application    ◉ safe formula    ◉ leaves a sticky dispersion layer    ◉ available in 3 sizes: 15g, 30g and 50g    ◉ available in 4 colors: clear, cover, pink, whiteThe product is intended for professional usecapacity: 30g
HOW TO USE:Gently matte the nail plate with a polishing block. In the case of nail extension, place the extension template under the nail plate. Apply a thin layer of gel with a brush and cure in the lamp. Then apply another layer of gel and build the desired length of the nail, then dry and harden in the UV / LED lamp. After drying, remove the stencil and shape the nail with a medium-grain file. A layer of hybrid color varnish and top coat can then be applied to the plate built in this way.CURING TIME:depending on the lamp power, cure 30 sec. or 60 sec.

PALU Builder Gel Cover/30g
PALU cover gel is a fully covering single-phase gel, intended for extending the natural nail plate on the form or tips. Thanks to its thick, self-leveling consistency, it is easy to apply.    ◉ color: cover, fully covering    ◉ camouflages nail imperfections    ◉ consistency: thick    ◉ self-levelling    ◉ Provides good adhesion and lasting shine    ◉ creates a hard coating, resistant to crushing    ◉ easy application    ◉ safe formula    ◉ leaves a sticky dispersion layer    ◉ available in 3 sizes: 15g, 30g and 50g    ◉ available in 4 colors: clear, cover, pink, whiteThe product is intended for professional usecapacity: 30g
HOW TO USE:Gently matte the nail plate with a polishing block. In the case of nail extension, place the extension template under the nail plate. Apply a thin layer of gel with a brush and cure in the lamp. Then apply another layer of gel and build the desired length of the nail, then dry and harden in the UV / LED lamp. After drying, remove the stencil and shape the nail with a medium-grain file. A layer of hybrid color varnish and top coat can then be applied to the plate built in this way.CURING TIME:depending on the lamp power, cure 30 sec. or 60 sec.

MANI KING Ceramic cutter CB007 - cone , F
A delicate ceramic cutter designed mainly for removing the hybrid mass without damaging the natural nail. It is also perfect for removing the remains of gel or acrylic from the natural nail plate so as not to damage it. It is also suitable for the development of gel and acrylic stylizations. It does not transfer heat to the nail plate. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensionsPin diameter: 2.35 mm (universal)Length 50mmWorking part: 14 x 6.5mmSharpness level: gentle

MANI KING Ceramic cutter CB007 - cone , M
Medium grit ceramic cutter, designed mainly for removing gel and acrylic mass. Also ideal for developing gel or acrylic stylizations. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. It does not transfer heat to the nail plate. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensionsPin diameter: 2.35 mm (universal)Length 50mmWorking part: 14 x 6.5mmSharpness level: medium

MANI KING Ceramic cutter CB007 - cone , XF
A very delicate ceramic cutter designed mainly for removing the hybrid mass without damaging the natural nail. It is also perfect for removing the remains of gel or acrylic from the natural nail plate so as not to damage it. It does not transfer heat to the nail plate. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensionsPin diameter: 2.35 mm (universal)Length 50mmWorking part: 14 x 6.5mmSharpness level: very delicate

MANI KING CB029 ceramic cutter - cone, F
The ceramic cutter gently removes the mass without causing vibrations. Very thoroughly removes dead skin. Ideal for quick and safe removal of hybrid varnish, gel or acrylic residues, without damaging the nail plate. It is also great for developing gel or acrylic mass. It does not transfer heat and does not cause an unpleasant burning sensation.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions:Pin diameter: 2.35 mm (universal)Length 51mmWorking part: 15 x 6mmSharpness level: gentle

MANI KING CB030 ceramic cutter - pointed, M
Ceramic cutter in the shape of a thin point. Very precise and multifunctional.It will easily cope with the unnecessary amount of gel or acrylic in hard-to-reach places, near the cuticles. Medium gradation cutter, designed mainly for removing gel and acrylic mass. Also ideal for developing gel or acrylic stylizations. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. It does not transfer heat to the nail plate. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensionsPin diameter: 2.35 mm (universal)Length 51mmWorking part: 14 x 7mmSharpness level: medium

MANI KING CB002 ceramic cutter - point, C
A thin, very precise cutter used to perform manicures and pedicures. Designed for advanced stylists. It does not transfer heat to the nail plate. Slow speed, made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. Durable, provides comfort during manicure and pedicure treatments, but also during podiatry treatments.Suitable for removing calluses.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions:Pin diameter: 2.35 mm (universal)Length 39mmWorking part: 14mmSharpness level: strong