Home

MANI KING Cleaner 1L
The cleaner is perfect for degreasing the nail plate after it has been dulled - it is enough to wipe the plate with a dust-free cotton swab soaked in the cleanser to prepare the nails for the application of the primer, base and varnish.You can also use the cleaner at the end of the manicure to remove the dispersion layer left over from the previously used products.      Attention
The preparation may cause irritation to the eyes, skin and respiratory system. In case of irritation - rinse with plenty of water and consult a doctor. Store in a dry, cool place. Protect against sunlight. Keep away from children. The product is for professional use only.Use in well-ventilated rooms.Do not use on irritated skin.

PALU Primer /10g
Acid primer:The acid preparation ensures high adhesion. Prevents nails from detaching. Recommended mainly for problematic nail plate, under acrylic styling.HOW TO USE:Apply a small amount to the matted nail plate, wait about 30 seconds for the preparation to evaporate.

PALU Builder Gel Clear/30g
Colorless single-phase gel, designed to extend the natural nail plate on the form or tips. Thanks to its thick, self-leveling consistency, it is easy to apply.    ◉ color: colorless    ◉ consistency: thick    ◉ self-levelling    ◉ Provides good adhesion and lasting shine    ◉ creates a hard coating, resistant to crushing    ◉ easy application    ◉ safe formula    ◉ leaves a sticky dispersion layer    ◉ available in 3 sizes: 15g, 30g and 50g    ◉ available in 4 colors: clear, cover, pink, whiteThe product is intended for professional usecapacity: 30g
HOW TO USE:Gently matte the nail plate with a polishing block. In the case of nail extension, place the extension template under the nail plate. Apply a thin layer of gel with a brush and cure in the lamp. Then apply another layer of gel and build the desired length of the nail, then dry and harden in the UV / LED lamp. After drying, remove the stencil and shape the nail with a medium-grain file. A layer of hybrid color varnish and top coat can then be applied to the plate built in this way.CURING TIME:depending on the lamp power, cure 30 sec. or 60 sec.

PALU Builder Gel Cover/30g
PALU cover gel is a fully covering single-phase gel, intended for extending the natural nail plate on the form or tips. Thanks to its thick, self-leveling consistency, it is easy to apply.    ◉ color: cover, fully covering    ◉ camouflages nail imperfections    ◉ consistency: thick    ◉ self-levelling    ◉ Provides good adhesion and lasting shine    ◉ creates a hard coating, resistant to crushing    ◉ easy application    ◉ safe formula    ◉ leaves a sticky dispersion layer    ◉ available in 3 sizes: 15g, 30g and 50g    ◉ available in 4 colors: clear, cover, pink, whiteThe product is intended for professional usecapacity: 30g
HOW TO USE:Gently matte the nail plate with a polishing block. In the case of nail extension, place the extension template under the nail plate. Apply a thin layer of gel with a brush and cure in the lamp. Then apply another layer of gel and build the desired length of the nail, then dry and harden in the UV / LED lamp. After drying, remove the stencil and shape the nail with a medium-grain file. A layer of hybrid color varnish and top coat can then be applied to the plate built in this way.CURING TIME:depending on the lamp power, cure 30 sec. or 60 sec.

MANI KING Ceramic cutter CB007 - cone , F
A delicate ceramic cutter designed mainly for removing the hybrid mass without damaging the natural nail. It is also perfect for removing the remains of gel or acrylic from the natural nail plate so as not to damage it. It is also suitable for the development of gel and acrylic stylizations. It does not transfer heat to the nail plate. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensionsPin diameter: 2.35 mm (universal)Length 50mmWorking part: 14 x 6.5mmSharpness level: gentle

MANI KING Ceramic cutter CB007 - cone , M
Medium grit ceramic cutter, designed mainly for removing gel and acrylic mass. Also ideal for developing gel or acrylic stylizations. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. It does not transfer heat to the nail plate. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensionsPin diameter: 2.35 mm (universal)Length 50mmWorking part: 14 x 6.5mmSharpness level: medium

MANI KING Ceramic cutter CB007 - cone , XF
A very delicate ceramic cutter designed mainly for removing the hybrid mass without damaging the natural nail. It is also perfect for removing the remains of gel or acrylic from the natural nail plate so as not to damage it. It does not transfer heat to the nail plate. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensionsPin diameter: 2.35 mm (universal)Length 50mmWorking part: 14 x 6.5mmSharpness level: very delicate

MANI KING CB029 ceramic cutter - cone, F
The ceramic cutter gently removes the mass without causing vibrations. Very thoroughly removes dead skin. Ideal for quick and safe removal of hybrid varnish, gel or acrylic residues, without damaging the nail plate. It is also great for developing gel or acrylic mass. It does not transfer heat and does not cause an unpleasant burning sensation.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions:Pin diameter: 2.35 mm (universal)Length 51mmWorking part: 15 x 6mmSharpness level: gentle

MANI KING CB030 ceramic cutter - pointed, M
Ceramic cutter in the shape of a thin point. Very precise and multifunctional.It will easily cope with the unnecessary amount of gel or acrylic in hard-to-reach places, near the cuticles. Medium gradation cutter, designed mainly for removing gel and acrylic mass. Also ideal for developing gel or acrylic stylizations. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. It does not transfer heat to the nail plate. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensionsPin diameter: 2.35 mm (universal)Length 51mmWorking part: 14 x 7mmSharpness level: medium

MANI KING CB002 ceramic cutter - point, C
A thin, very precise cutter used to perform manicures and pedicures. Designed for advanced stylists. It does not transfer heat to the nail plate. Slow speed, made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. Durable, provides comfort during manicure and pedicure treatments, but also during podiatry treatments.Suitable for removing calluses.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions:Pin diameter: 2.35 mm (universal)Length 39mmWorking part: 14mmSharpness level: strong

Palu Pro Light Builder Charming Cover - 45g 
PRO LIGHT BUILDER GEL is a multifunctional gel designed for salon, professional use. A special formula developed based on the experience of stylists to speed up and facilitate everyday work. Thixotropy combined with the best self-leveling properties guarantees a perfect, non-saging drop.PRO LIGHT BUILDER GEL has a low polymerization temperature, minimizing the burning effect in the lamp. The gel has a linear molecular structure, and its perfectly selected consistency, viscosity and density of the gel affect the quality of work. The modern formula was created to enable the use of the "gel without filing" technique, to protect the extended nail tunnel against expansion and to shorten the service time to a minimum. Especially recommended for quick additions and styling corrections.
PRO LIGHT BUILDER GEL is a gel that has the properties of a base, building and glossing product. In its structure, it contains adhesive substances that increase adhesion to the natural nail plate, building and glossing substances. To achieve the optimal adhesion effect with thin, problematic tiles, it is worth using a polish from any Palu base.The precisely adjusted viscosity of the gel guarantees that the consistency is medium-thick and quickly spreads on the nail. The gel with this viscosity leaves the brush well. The gel is durable, scratch-resistant and has a high, long-lasting shine.
PRO LIGHT BUILDER GEL is available in 6 carefully selected colors:
     ◉ CLEAR - transparent;     ◉ NEUTRAL - neutral, matched to the natural color of the skin, provides 90% coverage;     ◉ CLASSIC COVER - classic, the most popular color of the covering gel, provides 90% coverage;     ◉ POWDER PINK - very feminine, subtle pink shade, provides 90% coverage.     ◉ PRINCESS PINK - a girlish, light shade of pink with a glittery-pearl effect, provides 90% coverage.      ◉ CHARMING COVER - natural nude shade with spectacular golden particles, provides 90% coverage
Main features :     ◉ Self-levelling;     ◉ With thixotropy;     ◉ Multifunctional;     ◉ With intense gloss, durability and scratch resistance;     ◉ Acid free;     ◉ Makes work faster and easier;     ◉ Tunnel clamping after 5-8 sec. In the UV LED lamp;     ◉ Curing: 60s UV LED lamp.
Capacity : 45g

Palu Pro Light Builder Charming Cover - 90g
PRO LIGHT BUILDER GEL is a multifunctional gel designed for salon, professional use. A special formula developed based on the experience of stylists to speed up and facilitate everyday work. Thixotropy combined with the best self-leveling properties guarantees a perfect, non-saging drop.PRO LIGHT BUILDER GEL has a low polymerization temperature, minimizing the burning effect in the lamp. The gel has a linear molecular structure, and its perfectly selected consistency, viscosity and density of the gel affect the quality of work. The modern formula was created to enable the use of the "gel without filing" technique, to protect the extended nail tunnel against expansion and to shorten the service time to a minimum. Especially recommended for quick additions and styling corrections.
PRO LIGHT BUILDER GEL is a gel that has the properties of a base, building and glossing product. In its structure, it contains adhesive substances that increase adhesion to the natural nail plate, building and glossing substances. To achieve the optimal adhesion effect with thin, problematic tiles, it is worth using a polish from any Palu base.The precisely adjusted viscosity of the gel guarantees that the consistency is medium-thick and quickly spreads on the nail. The gel with this viscosity leaves the brush well. The gel is durable, scratch-resistant and has a high, long-lasting shine.
PRO LIGHT BUILDER GEL is available in 6 carefully selected colors:
     ◉ CLEAR - transparent;     ◉ NEUTRAL - neutral, matched to the natural color of the skin, provides 90% coverage;     ◉ CLASSIC COVER - classic, the most popular color of the covering gel, provides 90% coverage;     ◉ POWDER PINK - very feminine, subtle pink shade, provides 90% coverage.     ◉ PRINCESS PINK - a girlish, light shade of pink with a glittery-pearl effect, provides 90% coverage.      ◉ CHARMING COVER - natural nude shade with spectacular golden particles, provides 90% coverage
Main features :     ◉ Self-levelling;     ◉ With thixotropy;     ◉ Multifunctional;     ◉ With intense gloss, durability and scratch resistance;     ◉ Acid free;     ◉ Makes work faster and easier;     ◉ Tunnel clamping after 5-8 sec. In the UV LED lamp;     ◉ Curing: 60s UV LED lamp.
Capacity : 90g