Home

DDN 9 concentrate for cleaning and disinfecting tools 1l
DDN 9 concentrate for manual cleaning and disinfection of tools and medical devices, with a broad biocidal spectrum at low concentration and short action time (0.5% - 15 minutes). Effective against the coronavirus. For use in ultrasonic cleaners and semi-automatic car washes. Neutral pH and content of anti-corrosion substances protects the tools.
Medilab DDN 9 concentrate is a liquid preparation for manual cleaning and disinfection of tools, endoscopes and other medical devices. It quickly and effectively dissolves organic impurities, removes biofilm and prevents its formation. It has a wide biocidal spectrum in 15 minutes and a low concentration of the working solution (0.5%): B, Y, V (HIV, HBV, HCV, Herpes, Corona). The preparation was tested in dirty conditions according to phase 2/1 and phase 2/2 of European standards. The neutral pH of the solution ensures high material compatibility confirmed by tests - it does not damage delicate and precise medical equipment. Analysis of electrochemical pitting corrosion according to NF S94-402-1. DDN 9 can be used in ultrasonic and semi-automatic washers. Remains active regardless of water quality. Instruments can be safely stored in the solution for up to 72 hours. Chemical composition: quaternary ammonium compounds, scale inhibitors, cationic and non-ionic surfactants.What is the biocidal effectiveness of DDN 9?

Sterill 1l Designed for disinfection of small, hard-to-reach surfaces and medical equipment with a sprayer
Designed for disinfection of small, hard-to-reach surfaces and medical equipment. Effectively fights bacteria, fungi, mycobacteria and viruses. Used for disinfection of rehabilitation equipment, glass plates, bed frames, door handles, window sills, countertops, treatment chairs, couches, massage beds, toilet seats. Do not use on surfaces sensitive to alcohol!Active substances:Ethyl alcohol 72g/100gPropan 2-ol 3g/100g Didecyldimethylammonium chloride 0.5g/100gStorage:Store the product in a dry place at a temperature of 5°C to 25°C. Close the opened containers tightly for further storageShelf life: 36 monthsATTENTION! THE COLOR OF THE SPRAYER MAY VARY SIGNIFICANTLY FROM THE PICTURE!

Pink powder-free nitrile gloves PINK S 
Nitrile gloves, powder-free, recommended for people allergic to latex, commonly used in health care.
They are intended for medical and diagnostic examinations, therapeutic activities and work with septic material.
They provide the highest comfort of work and a natural fit to the user's hand.
They are characterized by flexibility and tensile strength.
Rolled cuff makes it easy to put on and take off and prevents unwinding.
Size : (S) 100 pcs

Powder-free nitrile gloves pink MAGENTA S
Nitrile gloves, powder-free, recommended for people allergic to latex, commonly used in health care.
They are intended for medical and diagnostic examinations, therapeutic activities and work with septic material.
They provide the highest comfort of work and a natural fit to the user's hand.
They are characterized by flexibility and tensile strength.
Rolled cuff makes it easy to put on and take off and prevents unwinding.
Size : (S) 100 pcs

Powder-free nitrile gloves pink MAGENTA M
Nitrile gloves, powder-free, recommended for people allergic to latex, commonly used in health care.
They are intended for medical and diagnostic examinations, therapeutic activities and work with septic material.
They provide the highest comfort of work and a natural fit to the user's hand.
They are characterized by flexibility and tensile strength.
Rolled cuff makes it easy to put on and take off and prevents unwinding.
Size : (M) 100 pcs

Pink powder-free nitrile gloves PINK XS
Nitrile gloves, powder-free, recommended for people allergic to latex, commonly used in health care.
They are intended for medical and diagnostic examinations, therapeutic activities and work with septic material.
They provide the highest comfort of work and a natural fit to the user's hand.
They are characterized by flexibility and tensile strength.
Rolled cuff makes it easy to put on and take off and prevents unwinding.
Size : (XS) 100 pcs

Aba Group CB030 ceramic cutter - pointed, M
Ceramic cutter in the shape of a thin point. Very precise and multifunctional.It will easily cope with the unnecessary amount of gel or acrylic in hard-to-reach places, near the cuticles. Medium gradation cutter, designed mainly for removing gel and acrylic mass. Also ideal for developing gel or acrylic stylizations. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. It does not transfer heat to the nail plate. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions
Pin diameter: 2.35 mm (universal)Length 51mmWorking part: 14 x 7mmSharpness level: medium

Cleaning brush - for milling machine 1 piece
The brush is designed to be used with a milling machine like a classic milling cutter. It is used for precise and gentle dedusting of nails and cleaning cutters.The universal size of the shank will make it suitable for most milling machines available on the market. Product for professional use.We send the color randomly.

Nail Drill Bits 3/32" No. 2 Rainbow M  (Flame 2 model)
Medium cone-shaped carbide cutter with cross-cuts. Designed to work both dry and wet.
Ideal for removing hybrid from the built-up nail plate as well as from gel and acrylic surfaces.
It will work well in podological treatments - smoothing calloused nails, developing corns.
The cutter is suitable for disinfection and sterilization. Fits any twist and lock milling machine

Aba Group Nail Drill Bits Carbide F31 - Cone , F
Fine carbide cutter in the shape of a very small cone with fine cross cuts. Designed to work both dry and wet. Ideal for gentle removal of hybrid remains at periungual shafts as well as for the development of cuticles.It will also work well in podiatry treatments - smoothing calloused nails, developing nail imprints as well as thick skin near the nail shaft.The cutter is suitable for disinfection and sterilization. Fits any twist and lock milling machineDimensions:
Shank diameter: 2.34 mm (universal)Length 44.5mmWorking part: 8x 2mmSharpness level: gentle

Aba Group Nail Drill Bits Diamond MR23 - cone, M
High-quality diamond milling cutter for cuticles and nail plate as well as for combined/no clipper manicure and podiatry treatments. Great for developing cuticles in milling and combined manicure. Perfect for working on periungual shafts, thickened cuticles, useful for removing fungus, green bacteria on the nail plate and for pedicures.They can be sterilized in autoclaves or other devices intended for instrument sterilization.Dimensions:
Pin diameter: 2.35 mm (universal)Working part: 5 x 2.3 mmSharpness level: medium

Aba Group Nail Drill Bits Diamond 720-6 R, Cylinder (RAINBOW)
Professional cutter made of the highest quality stainless steel with diamond-cobalt grit.Recommended for milling and combined manicure. Appropriate profiling of the cutter will allow for precise work. Diamond grit will be the best choice for developing and smoothing cuticles.Fits most milling machines.Contraindications:• nail and skin lesionsPrecautions:• Keep out of the sight and reach of children• Do not use in a manner other than intendedCutter for professional use only.