Cover Base №26 13ml LUNAMOON

Cover Base №26 LUNAMOON is a flexible base with pigment particles or glitter for covering and leveling nails.

    ◉ Not suitable for smoothing long nails without prior reinforcement.
    ◉ High level of coverage of the natural nail thanks to high pigmentation.
    ◉ Hypoallergenic and has a neutral smell.
    ◉ Curing time in the lamp is 120 seconds.
    ◉ Can be additionally heated to obtain an even thinner consistency.
    ◉ May provide minimal shrinkage during wear due to its elasticity.
    ◉ Requires a rubber base base.
    ◉ Slightly acidic, with a pH of 5-6.
    ◉ Curing lamp power requirements: 36 - 48 W. Must be an original lamp only.
    ◉ Easily removable by filing or liquid.
    ◉ Provides the possibility of wearing without peeling for 3-4 weeks.
    ◉ Flexible and pliable.
    ◉ The main rule for leveling is that the thickness should be 0.5 mm.
    ◉ Thixotropic - becomes thinner when applied with brush movements.
    ◉ Does not spread and quickly self-levels.
    ◉ Medium consistency, self-leveling.

(Product images on the website may differ from the actual product)

€10.99 (VAT incl.) €10.99 (VAT excl.)

VAT included

Description

Application method:

    1. Removal.
    2. Do not file the nail shape. Alternatively, leave a 2mm allowance that will be filed and removed after smoothing.
    3. Use a 220-grit file to gently file the nail from the top, lifting any nail plate scales. Alternatively, use a 100-grit buffer.
    4. Manicure.
    5. If you use nail polish removers, wash your hands with soap and water after use.
    6. Degrease the nail with LUNAmoon Nail Prep. Two passes are needed. Use 4 wipes. One wipe for 5 fingers. First pass - wipe the surface of the nail, second pass - take an orange wood stick, wrap it in a tissue and wipe everything around the cuticles and nail folds.
    7. Primer is optional.
    8. Base coat with LUNAmoon Rubber Base. It is best to apply with a flat gel brush. The strokes should be rubbed in. It is important to outline all the grooves of the nail. Cure for 60 seconds.
    9. Remove the stickiness.
    10. Apply a base coat for leveling. Cure in the lamp for 90 seconds.
    11. Dust off the forms after leveling. This is necessary to create a pin at the end that will hold the free edge.
    12. Since the nail was thin, it can curl. Therefore, it is necessary to file 1 mm of the natural nail from the center.
    13. After filing, remove the stickiness and apply a gel polish or a thin layer or camouflage base.
    14. Apply a top coat. Cure for 120 seconds. After curing, do not wipe anything, as this can dull the shine.