Base Strong Base 13ml LUNAMOON

STRONG BASE - is a solid base with gel-like properties.

Features:

    ◉ Makes nails hard and strong.
    ◉ Self-leveling very quickly.
    ◉ The consistency is medium-liquid, which allows you to make an alignment in a few seconds.
    ◉ Weakly acidic 5-6 pH.
    ◉ Hypoallergenic.
    ◉ May cause heat ans burning on damaged and very thin nails. Does not burn healthy nails.
    ◉ Removes well with both sawing and liquid.
    ◉ If you remove the stickiness from this base, you don`t need a top coat, as it already has a good gloss.
    ◉ The basic rule of alignment is that the thickness at the free edge should be 0.5 mm.
    ◉ The power of the lamp for polymerization should be 36 - 48 W, and it must be an original lamp.

(Product images on the website may differ from the actual product)

€10.99 (VAT incl.) €10.99 (VAT excl.)

VAT included

Description

Application method:

    1. Removal.
    2. Do not file the nail shape. Alternatively, leave a 2mm allowance that will be filed and removed after smoothing.
    3. Use a 220-grit file to gently file the nail from the top, lifting any nail plate scales. Alternatively, use a 100-grit buffer.
    4. Manicure.
    5. If you use nail polish removers, wash your hands with soap and water after use.
    6. Degrease the nail with LUNAmoon Nail Prep. Two passes are needed. Use 4 wipes. One wipe for 5 fingers. First pass - wipe the surface of the nail, second pass - take an orange wood stick, wrap it in a tissue and wipe everything around the cuticles and nail folds.
    7. Primer is optional.
    8. Base coat with LUNAmoon Rubber Base. It is best to apply with a flat gel brush. The strokes should be rubbed in. It is important to outline all the grooves of the nail. Cure for 60 seconds.
    9. Remove the stickiness.
    10. Apply a base coat for leveling. Cure in the lamp for 90 seconds.
    11. Dust off the forms after leveling. This is necessary to create a pin at the end that will hold the free edge.
    12. Since the nail was thin, it can curl. Therefore, it is necessary to file 1 mm of the natural nail from the center.
    13. After filing, remove the stickiness and apply a gel polish or a thin layer or camouflage base.
    14. Apply a top coat. Cure for 120 seconds. After curing, do not wipe anything, as this can dull the shine.