Extension gel Premium №15 30ml LUNAMOON

The Classic Gel Premium is a polymer light-curing material that, thanks to its strength, allows for significant nail plate extension. It contains photoinitiators that activate the polymerization process when exposed to ultraviolet light of a specific wavelength.

Features:

    ◉ Acid-free.
    ◉ Provides cushioning and does not crack upon impact.
    ◉ Medium consistency (not too thin and not too thick).
    ◉ Medium pigmentation, covers the free edge.
    ◉ Suitable for the "no-filing" technique.
    ◉ Suitable for extension using "upper forms".
    ◉ Doesn’t cause burning in the lamp.
    ◉ Becomes thicker in cold temperatures, thinner in warm temperatures.
    ◉ Thixotropic - becomes thinner during application with brush movements.
    ◉ Can be additionally heated to make the gel thinner.
    ◉ Hardens up to a thickness of 1 mm; if the thickness is less than 1 mm, it may flex slightly, but this does not affect wearability.
    ◉ Doesn’t shrink and holds the arch well.
    ◉ Requires an underlay of Rubber Base LUNAmoon.

(Product images on the website may differ from the actual product)

€19.99 (VAT incl.) €19.99 (VAT excl.)

VAT included

Description

Application method:

    1. Removal.
    2. Do not file the nail shape. Alternatively, leave a 2mm allowance that will be filed and removed after smoothing.
    3. Use a 220-grit file to gently file the nail from the top, lifting any nail plate scales. Alternatively, use a 100-grit buffer.
    4. Manicure.
    5. If you use nail polish removers, wash your hands with soap and water after use.
    6. Degrease the nail with LUNAmoon Nail Prep. Two passes are needed. Use 4 wipes. One wipe for 5 fingers. First pass - wipe the surface of the nail, second pass - take an orange wood stick, wrap it in a tissue and wipe everything around the cuticles and nail folds.
    7. Primer is optional.
    8. Base coat with LUNAmoon Rubber Base. It is best to apply with a flat gel brush. The strokes should be rubbed in. It is important to outline all the grooves of the nail. Cure for 60 seconds.
    9. Remove the stickiness.
    10. Apply a base coat for leveling. Cure in the lamp for 90 seconds.
    11. Dust off the forms after leveling. This is necessary to create a pin at the end that will hold the free edge.
    12. Since the nail was thin, it can curl. Therefore, it is necessary to file 1 mm of the natural nail from the center.
    13. After filing, remove the stickiness and apply a gel polish or a thin layer or camouflage base.
    14. Apply a top coat. Cure for 120 seconds. After curing, do not wipe anything, as this can dull the shine.