Flower Gel №2 – Nail Extension Gel 15ml LUNAMOON
Flower Gel №2 – Nail Extension Gel 15ml LUNAMOON
Flower Gel is a milk-based gel with dried flowers, designed for modeling, strengthening, and building.
It has a medium consistency and self-levels well. Thanks to the gel consistency, the dried flowers remain at different depths of the material and do not settle to the bottom of the jar.
The milky base blends harmoniously with various designs.
The ideal choice for masters who seek to create a delicate but spectacular manicure.
Features:
◉ Acid-free.
◉ It has good cushioning and does not crack during impacts.
◉ Medium consistency.
◉ Suitable for "no-file" and "on top forms" extension techniques.
◉ Suitable for strengthening the natural nail plate.
◉ Can be used for nail restoration.
◉ It is thixotropic, becoming thinner when moved with a brush.
◉ Self-levels well.
◉ Even distribution of dried flowers without settling.
◉ High strength after polymerization.
◉ A delicate milky base that suits any design.
◉ Does not cause burning in the lamp.
◉ It becomes thicker in the cold, and thinner in the heat.
◉ You can additionally heat it to make the gel thinner for easier application.
◉ Does not shrink, holds the arch well.
◉ Definitely needs a Rubber Base backing.
◉ Wavelength for polymerization: 365-405 nm.
◉ Recommended UV/LED lamp power: 36–48W.
◉ Permissible coating thickness: up to 0.5 mm at the end and up to 1 mm at the apex.
◉ Full polymerization - 120 seconds.
Application method:
1. Removal.
2. Do not file the nail shape. Alternatively, leave a 2mm allowance that will be filed and removed after smoothing.
3. Use a 220-grit file to gently file the nail from the top, lifting any nail plate scales. Alternatively, use a 100-grit buffer.
4. Manicure.
5. If you use nail polish removers, wash your hands with soap and water after use.
6. Degrease the nail with LUNAmoon Nail Prep. Two passes are needed. Use 4 wipes. One wipe for 5 fingers. First pass - wipe the surface of the nail, second pass - take an orange wood stick, wrap it in a tissue and wipe everything around the cuticles and nail folds.
7. Primer is optional.
8. Base coat with LUNAmoon Rubber Base. It is best to apply with a flat gel brush. The strokes should be rubbed in. It is important to outline all the grooves of the nail. Cure for 60 seconds.
9. Remove the stickiness.
10. Apply a base coat for leveling. Cure in the lamp for 90 seconds.
11. Dust off the forms after leveling. This is necessary to create a pin at the end that will hold the free edge.
12. Since the nail was thin, it can curl. Therefore, it is necessary to file 1 mm of the natural nail from the center.
13. After filing, remove the stickiness and apply a gel polish or a thin layer or camouflage base.
14. Apply a top coat. Cure for 120 seconds. After curing, do not wipe anything, as this can dull the shine.
feedback Report comment