List of products by brand Aba Group

Ceramic cutter CB009 - cone , F Aba Group
The ceramic cutter gently removes the mass without causing vibrations. Very thoroughly removes dead skin. Ideal for quick and safe removal of hybrid varnish, gel or acrylic residues, without damaging the nail plate. It is also great for developing gel or acrylic mass. It does not transfer heat and does not cause an unpleasant burning sensation.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions:
Pin diameter: 2.35 mm (universal)Length 51mmWorking part: 15 x 6mmSharpness level: gentle

Ceramic cutter CB009 - cone , XF Aba Group
The ceramic cutter gently removes the mass without causing vibrations. Very thoroughly removes dead skin. Ideal for quick and safe removal of hybrid varnish, gel or acrylic residues, without damaging the nail plate. It does not transfer heat and does not cause an unpleasant burning sensation.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions:
Pin diameter: 2.35 mm (universal)Length 51mmWorking part: 15 x 6mmSharpness level: very gentle

Aba Group CB030 ceramic cutter - pointed, M
Ceramic cutter in the shape of a thin point. Very precise and multifunctional.It will easily cope with the unnecessary amount of gel or acrylic in hard-to-reach places, near the cuticles. Medium gradation cutter, designed mainly for removing gel and acrylic mass. Also ideal for developing gel or acrylic stylizations. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. It does not transfer heat to the nail plate. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions
Pin diameter: 2.35 mm (universal)Length 51mmWorking part: 14 x 7mmSharpness level: medium

Cleaning brush - for milling machine 1 piece
The brush is designed to be used with a milling machine like a classic milling cutter. It is used for precise and gentle dedusting of nails and cleaning cutters.The universal size of the shank will make it suitable for most milling machines available on the market. Product for professional use.We send the color randomly.

Nail Drill Bits 3/32" No. 2 Rainbow M  (Flame 2 model)
Medium cone-shaped carbide cutter with cross-cuts. Designed to work both dry and wet.
Ideal for removing hybrid from the built-up nail plate as well as from gel and acrylic surfaces.
It will work well in podological treatments - smoothing calloused nails, developing corns.
The cutter is suitable for disinfection and sterilization. Fits any twist and lock milling machine

Aba Group Nail Drill Bits Carbide F34 - Cone , F
Carbide cutter in the shape of a small, narrow cone with fine cross cuts. Intended mainly for cuticles.The cutter is suitable for disinfection and sterilization. Fits any twist and lock milling machineDimensions:
Shank diameter: 2.34 mm (universal)Length 44.5mmWorking part: 12x 2mmSharpness level: gentle

Aba Group Nail Drill Bits Carbide cutter XF02 - cone, XF
Carbide nail drill bits - very delicate in the shape of a cone with fine transverse-cross cuts. Intended mainly for quick and safe removal of hybrid varnish, gel or acrylic residues, without damaging the nail plate. Thanks to its rounded tip, it will precisely remove the mass that is very close to the nail shaft - thus not affecting the structure of the built nail. The ergonomic shape will allow you to quickly develop nails without heating the plate.The cutter is suitable for disinfection and sterilization. Fits any twist and lock milling machineDimensions:
Shank diameter: 2.34 mm (universal)Length 38mmWorking part: 13x 6 mmSharpness level: very gentle

Aba Group Nail Drill Bits Carbide F18 - Cone, F
Carbide cutter in the shape of a pointed cone with standard cuts. Created for removing the old styling, working on gel and acrylic, cleaning the nails from below when correcting as well as pre-treatment of the cuticles. It will also work well in podiatry treatments - removal of thickening on the periungual shafts, development of corns, work on the subungual surface. The cutter is suitable for disinfection and sterilization. Fits any twist and lock milling machineDimensions:
Shank diameter: 2.34 mm (universal)Length 38mmWorking part: 18x 5mmSharpness level: gentle

Aba Group Nail Drill Bits Carbide F31 - Cone , F
Fine carbide cutter in the shape of a very small cone with fine cross cuts. Designed to work both dry and wet. Ideal for gentle removal of hybrid remains at periungual shafts as well as for the development of cuticles.It will also work well in podiatry treatments - smoothing calloused nails, developing nail imprints as well as thick skin near the nail shaft.The cutter is suitable for disinfection and sterilization. Fits any twist and lock milling machineDimensions:
Shank diameter: 2.34 mm (universal)Length 44.5mmWorking part: 8x 2mmSharpness level: gentle

Aba Group Nail Drill Bits Diamond MR23 - cone, M
High-quality diamond milling cutter for cuticles and nail plate as well as for combined/no clipper manicure and podiatry treatments. Great for developing cuticles in milling and combined manicure. Perfect for working on periungual shafts, thickened cuticles, useful for removing fungus, green bacteria on the nail plate and for pedicures.They can be sterilized in autoclaves or other devices intended for instrument sterilization.Dimensions:
Pin diameter: 2.35 mm (universal)Working part: 5 x 2.3 mmSharpness level: medium

Aba Group Nail Drill Bits Diamond 720-6 R, Cylinder (RAINBOW)
Professional cutter made of the highest quality stainless steel with diamond-cobalt grit.Recommended for milling and combined manicure. Appropriate profiling of the cutter will allow for precise work. Diamond grit will be the best choice for developing and smoothing cuticles.Fits most milling machines.Contraindications:• nail and skin lesionsPrecautions:• Keep out of the sight and reach of children• Do not use in a manner other than intendedCutter for professional use only.

Aba Group CB029 ceramic cutter - cone, C
A strong ceramic cutter designed mainly for removing gel or acrylic styling in the first stages of work. The closer to the natural nail plate, we suggest changing the cutter to a more delicate one to avoid damaging the natural nail plate. It is also great for podiatric treatments. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. It does not transfer heat to the nail plate. Durable, provides comfort during manicure, pedicure and podiatry treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions
Pin diameter: 2.35 mm (universal)Length 51mmWorking part: 15 x 6mmSharpness level: strong