Home

Claresa Extend Care 5in1 Keratin 2 - 5g
     ◉ strengthening proteins     ◉ gives the look of a natural manicure     ◉ evens out the color     ◉ possible extension of the nail up to 1 cm  Usage:Use as a standard hybrid base.Depending on the condition of the nail, spread 1 or 2 layers of the base on the plate and cure each of them for 30-60 seconds. in a LED/UV lamp.

Claresa Extend Care 5in1 Keratin 3 - 5g
     ◉ strengthening proteins     ◉ gives the look of a natural manicure     ◉ evens out the color     ◉ possible extension of the nail up to 1 cm  Usage:Use as a standard hybrid base.Depending on the condition of the nail, spread 1 or 2 layers of the base on the plate and cure each of them for 30-60 seconds. in a LED/UV lamp.

Claresa Extend Care 5in1 Keratin 4 - 5g
     ◉ strengthening proteins     ◉ gives the look of a natural manicure     ◉ evens out the color     ◉ possible extension of the nail up to 1 cm  Usage:Use as a standard hybrid base.Depending on the condition of the nail, spread 1 or 2 layers of the base on the plate and cure each of them for 30-60 seconds. in a LED/UV lamp.

Claresa Extend Care 5in1 Keratin 5 - 5g
     ◉ strengthening proteins     ◉ gives the look of a natural manicure     ◉ evens out the color     ◉ possible extension of the nail up to 1 cm  Usage:Use as a standard hybrid base.Depending on the condition of the nail, spread 1 or 2 layers of the base on the plate and cure each of them for 30-60 seconds. in a LED/UV lamp.

Ceramic cutter CB007 - cone , M Aba Group
Medium grit ceramic cutter, designed mainly for removing gel and acrylic mass. Also ideal for developing gel or acrylic stylizations. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. It does not transfer heat to the nail plate. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any "twist and lock" milling machineDimensions :
Pin diameter: 2.35 mm (universal)Length 50mmWorking part: 14 x 6.5mmSharpness level: medium

Ceramic cutter CB009 - cone , M Aba Group
A medium-gradation ceramic cutter, designed for removing and processing gel and acrylic masses. It does not transfer heat and does not cause an unpleasant burning sensation. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions
Pin diameter: 2.35 mm (universal)Length 51mmWorking part: 15 x 6mmSharpness level: medium

Claresa GEL POLISH Warmin' Fall 8 - 5g
COLOR: a beautiful, deep shade of green, which will be perfect as a base color to create a unique, Christmas styling.It is a color that combines exceptional elegance and sophistication with unprecedented depth and a hint of mystery. It is an ideal choice for fans of minimalism as well as women who value combinations of classic colors with shiny decorations. Are you wondering what colors Warmin' Fall 8 will look best with?
PROPERTIES :     ◉ Seamless application, no flooding of skins     ◉ intense shine     ◉ ideal, medium density     ◉ safe for nails and hands     ◉ durability up to 3 weeks     ◉ Capacity: 5g
APPLICATION :Apply a thin layer of colored hybrid varnish on the previously cured Claresa hybrid base and cure it in the UV / LED lamp. In order to achieve a satisfactory effect, you can repeat the action. Secure the styling by applying and curing TOP Clares.CURING TIME :     ◉ UV LED lamp 6 W – 2 x 45 sec.     ◉ UV LED lamp 9 W – 2 x 45 sec.     ◉ UV LED lamp 48 W – 30 sec.     ◉ UV LED lamp 60 W – 15 sec.     ◉ UV lamp 36 W – 120 sec.

Aba Group CB030 ceramic cutter - pointed, M
Ceramic cutter in the shape of a thin point. Very precise and multifunctional.It will easily cope with the unnecessary amount of gel or acrylic in hard-to-reach places, near the cuticles. Medium gradation cutter, designed mainly for removing gel and acrylic mass. Also ideal for developing gel or acrylic stylizations. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. It does not transfer heat to the nail plate. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions
Pin diameter: 2.35 mm (universal)Length 51mmWorking part: 14 x 7mmSharpness level: medium

Cleaning brush - for milling machine 1 piece
The brush is designed to be used with a milling machine like a classic milling cutter. It is used for precise and gentle dedusting of nails and cleaning cutters.The universal size of the shank will make it suitable for most milling machines available on the market. Product for professional use.We send the color randomly.

Nail Drill Bits 3/32" No. 2 Rainbow M  (Flame 2 model)
Medium cone-shaped carbide cutter with cross-cuts. Designed to work both dry and wet.
Ideal for removing hybrid from the built-up nail plate as well as from gel and acrylic surfaces.
It will work well in podological treatments - smoothing calloused nails, developing corns.
The cutter is suitable for disinfection and sterilization. Fits any twist and lock milling machine

Aba Group Nail Drill Bits Carbide F31 - Cone , F
Fine carbide cutter in the shape of a very small cone with fine cross cuts. Designed to work both dry and wet. Ideal for gentle removal of hybrid remains at periungual shafts as well as for the development of cuticles.It will also work well in podiatry treatments - smoothing calloused nails, developing nail imprints as well as thick skin near the nail shaft.The cutter is suitable for disinfection and sterilization. Fits any twist and lock milling machineDimensions:
Shank diameter: 2.34 mm (universal)Length 44.5mmWorking part: 8x 2mmSharpness level: gentle

Aba Group Nail Drill Bits Diamond MR23 - cone, M
High-quality diamond milling cutter for cuticles and nail plate as well as for combined/no clipper manicure and podiatry treatments. Great for developing cuticles in milling and combined manicure. Perfect for working on periungual shafts, thickened cuticles, useful for removing fungus, green bacteria on the nail plate and for pedicures.They can be sterilized in autoclaves or other devices intended for instrument sterilization.Dimensions:
Pin diameter: 2.35 mm (universal)Working part: 5 x 2.3 mmSharpness level: medium