Home

Aba Group CB005 ceramic cutter - cone, C
Ceramic cutter in the shape of a long flame. Precise, used for manicures and pedicures. It does not transfer heat to the nail plate. Slow speed, made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. Durable, provides comfort during manicure and pedicure treatments, but also during podiatry treatments.Suitable for removing calluses from the natural nail plate. It is also used for milling nails from below.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions:Pin diameter: 2.35 mm (universal)Length 39mmWorking part: 14mmSharpness Level: Power

PALU Cleaner 1 l
Liquid for washing and degreasing the nail plate and washing the dispersion layer. Enriched with a fragrance composition.    ◉ degreases without drying the nail plate    ◉ has a pleasant, slightly cherry scent    ◉ very efficient    ◉ product intended for professional use    ◉ capacity: 1LHOW TO USE:Soak a dust-free cotton pad with CLEANER and wipe each nail. Apply successive layers of hybrid manicure: base, color and top. After finishing with the sticky dispersion layer, wipe the top with a cotton pad soaked in CLEANER until the dispersion layer disappears completelyIngredients/ (INCI):Isopropyl Alcohol, Aqua, Parfum, Citral, Linalool, Cinnamal, Alpha-Isomethyl Ionone, Limonene, Eugenol.

PALU Cleaner 500 ml
Liquid for washing and degreasing the nail plate and washing the dispersion layer. Enriched with a fragrance composition.    ◉ degreases without drying the nail plate    ◉ has a pleasant, slightly cherry scent    ◉ very efficient    ◉ product intended for professional use    ◉ capacity: 500 mlHOW TO USE:Soak a dust-free cotton pad with CLEANER and wipe each nail. Apply successive layers of hybrid manicure: base, color and top. After finishing with the sticky dispersion layer, wipe the top with a cotton pad soaked in CLEANER until the dispersion layer disappears completelyIngredients/ (INCI):Isopropyl Alcohol, Aqua, Parfum, Citral, Linalool, Cinnamal, Alpha-Isomethyl Ionone, Limonene, Eugenol.

PALU Primer /10g
Acid primer:The acid preparation ensures high adhesion. Prevents nails from detaching. Recommended mainly for problematic nail plate, under acrylic styling.HOW TO USE:Apply a small amount to the matted nail plate, wait about 30 seconds for the preparation to evaporate.

PALU Builder Gel Clear/30g
Colorless single-phase gel, designed to extend the natural nail plate on the form or tips. Thanks to its thick, self-leveling consistency, it is easy to apply.    ◉ color: colorless    ◉ consistency: thick    ◉ self-levelling    ◉ Provides good adhesion and lasting shine    ◉ creates a hard coating, resistant to crushing    ◉ easy application    ◉ safe formula    ◉ leaves a sticky dispersion layer    ◉ available in 3 sizes: 15g, 30g and 50g    ◉ available in 4 colors: clear, cover, pink, whiteThe product is intended for professional usecapacity: 30g
HOW TO USE:Gently matte the nail plate with a polishing block. In the case of nail extension, place the extension template under the nail plate. Apply a thin layer of gel with a brush and cure in the lamp. Then apply another layer of gel and build the desired length of the nail, then dry and harden in the UV / LED lamp. After drying, remove the stencil and shape the nail with a medium-grain file. A layer of hybrid color varnish and top coat can then be applied to the plate built in this way.CURING TIME:depending on the lamp power, cure 30 sec. or 60 sec.

PALU Builder Gel Cover/30g
PALU cover gel is a fully covering single-phase gel, intended for extending the natural nail plate on the form or tips. Thanks to its thick, self-leveling consistency, it is easy to apply.    ◉ color: cover, fully covering    ◉ camouflages nail imperfections    ◉ consistency: thick    ◉ self-levelling    ◉ Provides good adhesion and lasting shine    ◉ creates a hard coating, resistant to crushing    ◉ easy application    ◉ safe formula    ◉ leaves a sticky dispersion layer    ◉ available in 3 sizes: 15g, 30g and 50g    ◉ available in 4 colors: clear, cover, pink, whiteThe product is intended for professional usecapacity: 30g
HOW TO USE:Gently matte the nail plate with a polishing block. In the case of nail extension, place the extension template under the nail plate. Apply a thin layer of gel with a brush and cure in the lamp. Then apply another layer of gel and build the desired length of the nail, then dry and harden in the UV / LED lamp. After drying, remove the stencil and shape the nail with a medium-grain file. A layer of hybrid color varnish and top coat can then be applied to the plate built in this way.CURING TIME:depending on the lamp power, cure 30 sec. or 60 sec.

Mini buffer 100/180 Aba Group - 5 pcs
The perfect MINI version of our polisher for the preparation and smoothing of the nail surface. It is ideal for matting the natural nail plate as well as smoothing out unevenness caused by applying gel or acrylic mass. The MINI polisher will be especially useful in office work with a single use. A more convenient and precise alternative to a polishing block.This baby won the hearts of professional stylists all over Poland. Check how this product will work in your hands!  Advantages of the polisher:    ◉ Very precise    ◉ Perfect for preparing the nail plate for a hybrid    ◉ You will dull your nails quickly    ◉ Innovative and ergonomic shape    ◉ Made of the highest quality materials
Gradation: 100/180

Nail file 180/240 HALF MOON SLIM Aba Group
Product specification :
Shape : Half MoonGradation : 180/240Thickness : SLIMVersion : Without packaging .
Aba Group disposable nail files with 180/240 grit, dedicated for professional use. Files are designed to work with gel and acrylic mass, recommended for treatments requiring effective and safe filing, shortening, or for preliminary nail treatment.180 is the most popular choice among stylists. The most versatile gradation will be successfully used for shortening nails, filing and developing the hybrid mass, as well as for leveling the gel mass.240 is the smallest gradation, recommended for the natural nail plate. It will gently smooth the free edge of the nail and give it the final shape, without fear of splitting the nail plate. In addition, it can be used as a polisher to dull the nail just before applying products.

Aba Group Carbide Cutter C28 - Inverted Cone, C
Carbide cutter - strong, pear-shaped with cross cuts. Designed for removing gel, acrylic and polygel. Very thoroughly removes dead skin cells and calluses. Provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Fits any twist and lock milling machineDimensions:Shank diameter: 2.34 mm (universal)Length 38mmWorking part: 13x 6mmSharpness level: strong

Set of 10 mini buffer WAFER 100/180 Aba Group
Complete innovation! Miniature polishers, 100/180 gradation, 10 pcs. In a package. Their small size will allow for precise matting of the nail plate and smoothing out unevenness resulting from the application of gel or acrylic mass.
Advantages of the polisher :
  ◉ Very precise
  ◉ Perfect for preparing the nail plate for a hybrid
  ◉ You will mat your nails quickly
  ◉ Innovative and ergonomic shape
  ◉ Made of the highest quality materials
Gradation: 100/180

Ceramic cutter CB016 - cone, F - Aba Group
Cutter designed for gentle removal of hybrid, gel, acrylic and polygel masses. It removes dead epidermis very thoroughly and prepares the nail plate for styling. Durable, provides comfort during manicure and pedicure treatments.Suitable for removing calluses. Ideal for the development of gel or acrylic mass at the periungual shafts.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions:Pin diameter: 2.35 mm (universal)Length 45mmWorking part: 13x 5mm

Aba Group CB029 ceramic cutter - cone, M
A medium-gradation ceramic cutter, designed for removing and processing gel and acrylic masses. It does not transfer heat and does not cause an unpleasant burning sensation. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions:Pin diameter: 2.35 mm (universal)Length 51mmWorking part: 15 x 6mmSharpness level: medium