REPLACEMENT O-RINGS  for mandrel  12 pcs
Made in USA

MANI KING Diamond drill bit MP33 - M
Product detailsThe pear-shape drill bit- High quality diamond drill bit for cuticles and nail plate and for combination/clippers-free manicure and podiatric treatments. Ideal for working on calluses and corns.They can be sterilized in autoclaves or other devices designed to sterilize instruments.Dimensions:Shank diameter: 2.35 mm (universal)Working part: 8 x 3.3mmSharpness level: medium

Pink 4 - Drill bit roller IQNAILS 2      ◉ precise preparation and matting of the nail plate     ◉ smoothing the skin and the surface of the natural nail plate     ◉ safe shortening of natural, gel and acrylic nails     ◉ creating the perfect C-curve     ◉ universal cutter diameter - 2.35 mmAll IQ Nails cutters were made in Poland and are recommended for a perfect milling manicure.Can be sterilized in an autoclave!

Nail drill bit in the shape of a truncated cone with grit 2in1 DuoCutter IQNAILS 3Diamond nail drill bit are known for their variety and great personalization possibilities. Unfortunately, diamond abrasive is less resistant to everyday work than cutters made of, for example, sintered carbide. To solve the problem of frequent tool change, we have created DUO CUTTERS.What is the innovation of Duo Cutters? Well, the spaces of the standard diamond embankment have been additionally filled with a fine embankment to significantly extend the life of the tools. Now you don't have to worry that your cutters will quickly need to be replaced with new ones and you can enjoy your favorite shapes for a long time.Nail drill bit in the shape of a truncated cone - Nail drill bit with coating 2in1 DuoFrez 171.FM.031. Its size has been reduced compared to the traditional truncated cone to be able to work with the entire surface of the nail drill bit
This nail drill is used for :     ◉ cleaning the nail plate     ◉ push back and push back cuticles     ◉ pre-removal of epithelium     ◉ cleaning the periungual shafts     ◉ matting of the natural nail plate     ◉ smoothing the gap between the natural nail plate and the built styling     ◉ will perfectly replace the pusherAll IQ Nails cutters were made in Poland and are recommended for a perfect milling manicure.Can be sterilized in an autoclave!

Pink 5 cutter rounded cone 6
Cutter in the shape of a rounded cone 199.514.016 with fine diamond grit -       ◉ allows you to push back and develop even the most problematic and calloused cuticles

Nail drill bits All In One by Matka Polka Hybrid 12
It's here! All In One cutter was created in cooperation with @matkapolkahybrydowaA Christmas tree-shaped cutter with a cross type of cuts, which will ensure smoothness of the processed surface, will also be an ideal solution for beginners.The upper part of the cutter has very fine cuts designed for safe work with the cuticles.Due to its delicacy, it will be perfect for removing hybrid and gel manicures.The shape of the cutter also allows you to lift the nails growing down during the gel correction without worrying about hurting the hyponychium.It will be perfect for removing hybrid and gel manicure.

Ceramic cutter CB009 - cone , XF Mani King
The ceramic cutter gently removes the mass without causing vibrations. Very thoroughly removes dead skin. Ideal for quick and safe removal of hybrid varnish, gel or acrylic residues, without damaging the nail plate. It does not transfer heat and does not cause an unpleasant burning sensation.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions:
Pin diameter: 2.35 mm (universal)Length 51mmWorking part: 15 x 6mmSharpness level: very gentle

MANI KING Cleaner 1L
The cleaner is perfect for degreasing the nail plate after it has been dulled - it is enough to wipe the plate with a dust-free cotton swab soaked in the cleanser to prepare the nails for the application of the primer, base and varnish.You can also use the cleaner at the end of the manicure to remove the dispersion layer left over from the previously used products.      Attention
The preparation may cause irritation to the eyes, skin and respiratory system. In case of irritation - rinse with plenty of water and consult a doctor. Store in a dry, cool place. Protect against sunlight. Keep away from children. The product is for professional use only.Use in well-ventilated rooms.Do not use on irritated skin.

MANI KING Ceramic cutter CB007 - cone , M
Medium grit ceramic cutter, designed mainly for removing gel and acrylic mass. Also ideal for developing gel or acrylic stylizations. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. It does not transfer heat to the nail plate. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensionsPin diameter: 2.35 mm (universal)Length 50mmWorking part: 14 x 6.5mmSharpness level: medium

MANI KING Ceramic cutter CB007 - cone , XF
A very delicate ceramic cutter designed mainly for removing the hybrid mass without damaging the natural nail. It is also perfect for removing the remains of gel or acrylic from the natural nail plate so as not to damage it. It does not transfer heat to the nail plate. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensionsPin diameter: 2.35 mm (universal)Length 50mmWorking part: 14 x 6.5mmSharpness level: very delicate

MANI KING CB029 ceramic cutter - cone, F
The ceramic cutter gently removes the mass without causing vibrations. Very thoroughly removes dead skin. Ideal for quick and safe removal of hybrid varnish, gel or acrylic residues, without damaging the nail plate. It is also great for developing gel or acrylic mass. It does not transfer heat and does not cause an unpleasant burning sensation.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions:Pin diameter: 2.35 mm (universal)Length 51mmWorking part: 15 x 6mmSharpness level: gentle

MANI KING CB030 ceramic cutter - pointed, M
Ceramic cutter in the shape of a thin point. Very precise and multifunctional.It will easily cope with the unnecessary amount of gel or acrylic in hard-to-reach places, near the cuticles. Medium gradation cutter, designed mainly for removing gel and acrylic mass. Also ideal for developing gel or acrylic stylizations. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. It does not transfer heat to the nail plate. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensionsPin diameter: 2.35 mm (universal)Length 51mmWorking part: 14 x 7mmSharpness level: medium