Gel polish Color №01 - 13ml LUNAMOON
The perfect pigmented gel polish, which applies smoothly in one or two thin coats. It doesn't streak during application and easily self-levels. It has a medium-thick consistency.Application method:    ◉ After leveling with the base/gel, remove the stickiness.    ◉ Apply the gel polish (1-2 thin coats). Load the brush with the material, paint the center of the nail, then the side walls. Use a brush for fine lines to approach the cuticle. The first layer should always be semi-transparent.    ◉ Cure for 60 seconds.    ◉ Check with an orangewood stick if everything is dry.    ◉ Apply the top coat and cure in the lamp for 60 seconds. After curing, don’t wipe anything off, as it may dull the shine.(Product images on the website may differ from the actual product)

Cream for skin and nail care with symptoms of fungus Farmona podologic medical 15 ml
PURPOSE: skin and nail care with symptoms of fungusACTIVE INGREDIENTS: Dermo Protector, urea, Hydromanil, vitamins, silicone oilsEFFECTS: noticeably regenerates the skin and nail plate, moisturizes and creates a protective layer, cares for and restores a feeling of comfort, soothes irritation. The product is also recommended for diabeticsHOW TO USE: Apply the preparation to clean, dry problematic areas twice a day, massage in and leave to absorb.Information: Dermatologically tested

Top Moonlight efekt 8ml (no wipe) MAKEAR
Shine with the glow of the moonlit night! Glitter, glow and unpredictability are what characterize the Top Moonlight Effect by MAKEAR.    ◉ Due to the very large amount of three-dimensional dust in the top, please treat the above product as a decorative item.    ◉ Thousands of shiny three-dimensional particles closed in a hybrid nail polish top.    ◉ Top Moonlight is changeable, intriguing and incredibly effective, but the light determines what effect you get, so play with the light, because depending on its source and intensity, your manicure will look different.    ◉ Get the finishing touch to your manicure in the form of a delicate sparkling glitter, up to the captivating effect of shiny crushed diamonds.
    Choose your moon shine on your nails with TOP MOONLIGHT MAKEAR.    ◉ Properties: as a topcoat,    ◉ Outstanding damage tolerance,    ◉ Insensitive to stress,    ◉ Abrasion resistant,    ◉ More efficient,    ◉ Amazing shine,    ◉ Does not streak or discolor colors,    ◉ It is an ideal base for watercolor decorations,    ◉ Consistency: medium-thick / self-leveling,    How to use:     ◉ Apply the medium layer of the top with gentle movements, cure min 60 seconds in a led / dual led lamp,    ◉ Gives the perfect nail shape when applying,    ◉ Suitable for all types of nails,    ◉ Creates a wet shimmer effect,    ◉ Perfect for hybrid and gel styling,   Capacity: 8ml,LED lamp min. 48W - 1min. 36W UV lamp - 2min.

Acetone hybrid varnish remover (acetone) Semilac 50 ml
Acetone Semilac is used to remove hybrid varnish from nails.
To remove the hybrid varnish, file the top layer of varnish, soak the swab with acetone and wrap it with aluminum foil.
Leave for 8-10 minutes and so soaked varnish can be easily removed from the nail plate.
APPLICATION OF ACETONE :If you want to remove the hybrid varnish with Semilac Acetone, first of all, gently matt the top layer with a polishing block or a 180/240 file. In the next step, you will need special films - Semilac Remover Wraps, which will significantly facilitate the process of soaking the hybrid.Each foil has a dust-free swab that should be soaked in acetone, then applied to each nail and wrapped in foil.Nails should remain wrapped in foil for about 10-15 minutes. After the specified time, the foil should be removed and the remains of the varnish removed with a pusher.

Gel polish Color №02 - 13ml LUNAMOON
The perfect pigmented gel polish, which applies smoothly in one or two thin coats. It doesn't streak during application and easily self-levels. It has a medium-thick consistency.Application method:    ◉ After leveling with the base/gel, remove the stickiness.    ◉ Apply the gel polish (1-2 thin coats). Load the brush with the material, paint the center of the nail, then the side walls. Use a brush for fine lines to approach the cuticle. The first layer should always be semi-transparent.    ◉ Cure for 60 seconds.    ◉ Check with an orangewood stick if everything is dry.    ◉ Apply the top coat and cure in the lamp for 60 seconds. After curing, don’t wipe anything off, as it may dull the shine.(Product images on the website may differ from the actual product)

Nail care serum with symptoms of onycholysis concentrated Farmona podologic medical 15 ml
PURPOSE: nail care with symptoms of onycholysisACTIVE INGREDIENTS: collagen, tea tree oil, vitamins, panthenolEFFECTS: strengthens and cares for the nail plate, increases resistance to nail breakage and splitting, noticeably moisturizes and regenerates the nail plate and the cuticles around the nail plate. The product is also recommended for diabeticsHOW TO USE: Apply the preparation to clean, dry problematic areas twice a day, massage in and leave to absorb.Information: Dermatologically tested

Clear Fiber BASE 8ml MAKEAR
When the natural nail plate is weak and needs strengthening and making it harder, there is only one solution! How to avoid this problem? Clear Fiber Base is the solution.     ◉ A perfectly contoured brush ensures easy application of the product even in problematic places such as the area around the nail shaft,    Color: Colorless, TransparentConsistency: Medium Thick    ◉ Tougher than Rubber base, more flexible than Base Coat    ◉ Thicker than Elastic Base, more fluid than Rubber Base,    ◉ After hardening in the lamp, no filing required,    ◉ Consistency: Thick,    How to use:     ◉ Paint a thin layer under the hybrid, rub into the plate with a brush under the gel mass and cure for 60 seconds in a led / dualled lamp,    ◉ It has fiberglass (polyester glass) fibers, thanks to which, despite the minimal alignment of the natural nail, it strengthens its structure,    ◉ A perfectly contoured brush ensures easy application of the product even in problematic places such as the area around the nail shaft,
LED lamp min. 48W - 1min. 36W UV lamp - 2min.   Capacity: 8ml,

Remover for hybrid varnish (Remover) Semilac Remover 500 ml
A specialized liquid for removing hybrid varnish.
The innovative formula was designed to protect the natural nail plate.
Lanolin contained in it provides adequate hydration and protects against drying of the nails and cuticles.
APPLICATION OF REMOVER :Application If you want to remove the hybrid varnish with Semilac Remover, first of all, gently matt the top layer with a polishing block or file with a 180/240 gradation. In the next step, you will need special films - Semilac Remover Wraps, which will significantly facilitate the process of soaking the hybrid. there is a dust-free cotton swab, which should be soaked in Semilac Remover, then applied to each nail and wrapped with foil.The nails should remain wrapped with foil for about 10-15 minutes. After the specified time, the foil should be removed and the remains of the varnish removed with a pusher.

Gel polish Color №03 - 13ml LUNAMOON
The perfect pigmented gel polish, which applies smoothly in one or two thin coats. It doesn't streak during application and easily self-levels. It has a medium-thick consistency.Application method:    ◉ After leveling with the base/gel, remove the stickiness.    ◉ Apply the gel polish (1-2 thin coats). Load the brush with the material, paint the center of the nail, then the side walls. Use a brush for fine lines to approach the cuticle. The first layer should always be semi-transparent.    ◉ Cure for 60 seconds.    ◉ Check with an orangewood stick if everything is dry.    ◉ Apply the top coat and cure in the lamp for 60 seconds. After curing, don’t wipe anything off, as it may dull the shine.(Product images on the website may differ from the actual product)

Farmona podologic medical enzymatic foot peeling 200 ml
PURPOSE: all skin types, especially rough skin, thickened stratum corneum of the epidermis.ACTIVE INGREDIENTS: UREA, PAPAIN, HYALURONIC ACID, COLLAGEN, ELASTINEFFECTS: removes dead skin cells, smoothes the skin surface, intensively regenerates, moisturizes, elasticizes. The product is also recommended for diabetics.HOW TO USE: apply the peeling evenly to the feet and perform a gentle massage. Leave for 10-15 minutes. Wash off with warm, moist compresses.Capacity: 200ml

PA02 ProArt Black 10g MAKEAR
GEL FOR DECORATION WITH STRONG PIGMENTATION     Application:
One stroke, zhostovo, baby boomer, painted decorations, stamping.Free your artistic soul with ProArt MAKEAR.Proarts are nail art gels that will turn a nail styling studio into an art gallery. They were created for all enthusiasts of decorations as well as real artists for whom manicure is a canvas to express themselves and their personality.Thanks to the unique formula, you can easily make babyboomer, geometrie, one stroke, zhostovo. Proart stamping gels are perfect for stamping. They also work well when painting icons and landscapes. Strong pigmentation and appropriate density of ProArt is the key to successful styling. A single brush stroke leaves a trace of perfect color saturation, without having to correct it. Stamping gels combine with each other, creating a uniform combination of colors that do not melt or shrink, leaving time to refine each decoration.Your imagination sets the limits! Free her with Proart MAKEAR!         ◉ Super pigmented,         ◉ Without a dispersion layer, does not require wiping with Cleaner,         ◉ We recommend to protect with a layer of top coat        Note: due to its pigmentation, the product is not used for structural and convex decorations,LED lamp min. 48W - 1min.UV lamp 36W - 2min.
Capacity: 10g,

Remover for hybrid varnish (Remover) Semilac Remover 125 ml
Acetone Semilac is used to remove hybrid varnish from nails. To remove the hybrid varnish, file the top layer of varnish, soak the swab with acetone and wrap it with aluminum foil. Leave for 8-10 minutes and so soaked varnish can be easily removed from the nail plate.
A specialized liquid for removing hybrid varnish. The innovative formula was designed to protect the natural nail plate. Lanolin contained in it provides adequate hydration and protects against drying of the nails and cuticles.
APPLICATION OF REMOVER :Application If you want to remove the hybrid varnish with Semilac Remover, first of all, gently matt the top layer with a polishing block or file with a 180/240 gradation. In the next step, you will need special films - Semilac Remover Wraps, which will significantly facilitate the process of soaking the hybrid. there is a dust-free cotton swab, which should be soaked in Semilac Remover, then applied to each nail and wrapped with foil.The nails should remain wrapped with foil for about 10-15 minutes. After the specified time, the foil should be removed and the remains of the varnish removed with a pusher.