Home

Nail Drill Bits 3/32" No. 2 Rainbow M  (Flame 2 model)
Medium cone-shaped carbide cutter with cross-cuts. Designed to work both dry and wet.
Ideal for removing hybrid from the built-up nail plate as well as from gel and acrylic surfaces.
It will work well in podological treatments - smoothing calloused nails, developing corns.
The cutter is suitable for disinfection and sterilization. Fits any twist and lock milling machine

Aba Group Nail Drill Bits Carbide cutter XF02 - cone, XF
Carbide nail drill bits - very delicate in the shape of a cone with fine transverse-cross cuts. Intended mainly for quick and safe removal of hybrid varnish, gel or acrylic residues, without damaging the nail plate. Thanks to its rounded tip, it will precisely remove the mass that is very close to the nail shaft - thus not affecting the structure of the built nail. The ergonomic shape will allow you to quickly develop nails without heating the plate.The cutter is suitable for disinfection and sterilization. Fits any twist and lock milling machineDimensions:
Shank diameter: 2.34 mm (universal)Length 38mmWorking part: 13x 6 mmSharpness level: very gentle

Aba Group Nail Drill Bits Carbide F18 - Cone, F
Carbide cutter in the shape of a pointed cone with standard cuts. Created for removing the old styling, working on gel and acrylic, cleaning the nails from below when correcting as well as pre-treatment of the cuticles. It will also work well in podiatry treatments - removal of thickening on the periungual shafts, development of corns, work on the subungual surface. The cutter is suitable for disinfection and sterilization. Fits any twist and lock milling machineDimensions:
Shank diameter: 2.34 mm (universal)Length 38mmWorking part: 18x 5mmSharpness level: gentle

Aba Group Nail Drill Bits Carbide F31 - Cone , F
Fine carbide cutter in the shape of a very small cone with fine cross cuts. Designed to work both dry and wet. Ideal for gentle removal of hybrid remains at periungual shafts as well as for the development of cuticles.It will also work well in podiatry treatments - smoothing calloused nails, developing nail imprints as well as thick skin near the nail shaft.The cutter is suitable for disinfection and sterilization. Fits any twist and lock milling machineDimensions:
Shank diameter: 2.34 mm (universal)Length 44.5mmWorking part: 8x 2mmSharpness level: gentle

Aba Group Nail Drill Bits Diamond MR23 - cone, M
High-quality diamond milling cutter for cuticles and nail plate as well as for combined/no clipper manicure and podiatry treatments. Great for developing cuticles in milling and combined manicure. Perfect for working on periungual shafts, thickened cuticles, useful for removing fungus, green bacteria on the nail plate and for pedicures.They can be sterilized in autoclaves or other devices intended for instrument sterilization.Dimensions:
Pin diameter: 2.35 mm (universal)Working part: 5 x 2.3 mmSharpness level: medium

Aba Group Nail Drill Bits Diamond 720-6 R, Cylinder (RAINBOW)
Professional cutter made of the highest quality stainless steel with diamond-cobalt grit.Recommended for milling and combined manicure. Appropriate profiling of the cutter will allow for precise work. Diamond grit will be the best choice for developing and smoothing cuticles.Fits most milling machines.Contraindications:• nail and skin lesionsPrecautions:• Keep out of the sight and reach of children• Do not use in a manner other than intendedCutter for professional use only.

Aba Group CB029 ceramic cutter - cone, C
A strong ceramic cutter designed mainly for removing gel or acrylic styling in the first stages of work. The closer to the natural nail plate, we suggest changing the cutter to a more delicate one to avoid damaging the natural nail plate. It is also great for podiatric treatments. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. It does not transfer heat to the nail plate. Durable, provides comfort during manicure, pedicure and podiatry treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions
Pin diameter: 2.35 mm (universal)Length 51mmWorking part: 15 x 6mmSharpness level: strong

Aba Group CB032 ceramic cutter - cone, M
A medium-gradation ceramic cutter, designed for removing and processing gel and acrylic masses. It does not transfer heat and does not cause an unpleasant burning sensation. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions:
Pin diameter: 2.35 mm (universal)Length 53mmWorking part: 20 x 6mmSharpness level: medium

Aba Group XF11 Carbide Cutter - Cone, XF
Cone-shaped carbide cutter with very fine cross cuts. Intended mainly for quick and safe removal of hybrid varnish, gel or acrylic residues, without damaging the nail plate. It will precisely remove the mass that is very close to the nail shaft - thus not affecting the structure of the built nail. The ergonomic shape will allow you to quickly develop nails without heating the plate.The cutter is suitable for disinfection and sterilization. Fits any twist and lock milling machineDimensions
Shank diameter: 2.34 mm (universal)Length 38mmWorking part: 13x 4 mm

Aba Group Tear-off buffer Flowers Block of disposable tear-off buffers "Flowers" 100/100, 45 pcs
Tear-off buffer "Flowers" is the perfect solution for professional nail stylists who use several or even a dozen polishers every day. A handy package consisting of 3 blocks of 15 small polishers will be perfect for salon work, when we need to have all the tools at hand. As with files, polishers should be disposable for hygienic reasons. The "Flowers" polisher will matt and smooth the surface of the nail well. Product features:     ◉ precise,     ◉ Mattes and smoothes the surface well,     ◉ Convenient tear off,     ◉ Made of the highest quality materials.Height: 2cmWidth: 6cmThickness: 1c

White Cube Polisher Mini 100/100 (25 pcs.)
A handy cube-shaped polishing block is an ideal solution for working with the natural nail plate as well as for the acrylic and gel method.
Product for professional and home use.dimensions 2.5cm x 2.5cm

Aba Group Nail file 150/180 BY PAULINA PASTUSZAK
Gradation: 150/180Shape: DOLPHINThickness: STANDARDVersion: Secure Bundle
We created the file in cooperation with Paulina Pastuszak, an educator in the field of manicure, as well as a professional nail stylist. Its unique shape - a dolphin - provides a new quality of work with the nail, which is possible thanks to the narrow "mouth". The tip allows you to reach hard-to-reach places, which is extremely important to matt the plate well. The gradation of the file is suitable for creating gel stylizations, and the combination of two different grit sizes provides great functionality. The ruler will help us measure the length of the nail during work, and the printed shape templates will be a great help especially for beginner stylists. They allow you to easily compare the course of the side lines by applying your fingernail.
The disposable file by Paulina Pastuszak is sold in a Safe Package, i.e. packed in a sealed foil. By purchasing products in this version, you can be sure that the file has not been used. This is a very hygienic solution that emphasizes the care of the salon or stylist for the safety and quality of the service.
The file gradation value informs how many abrasive grains there are on 1 cm2 of its surface. The fine-grained side (180 grains per 1 cm2) is recommended for modeling and matting of the nail plate, while the medium-grained (150 grains per 1 cm2) is used to shape the artificial, gel and acrylic nails.Directions for use: It is recommended to saw the nail in one direction, with relatively long file strokes at a 45-degree angle. Perpendicular, multidirectional sawing causes the risk of delamination and brittleness of the nail plate.