Home

Active filters

  • Brand: Afinia clear
  • Brand: IQNails frezy do paznokci clear
  • Brand: MANI KING clear
Nail drill bits All In One by Matka Polka Hybrid 12
Nail drill bits All In One by Matka Polka Hybrid 12
It's here! All In One cutter was created in cooperation with @matkapolkahybrydowaA Christmas tree-shaped cutter with a cross type of cuts, which will ensure smoothness of the processed surface, will also be an ideal solution for beginners.The upper part of the cutter has very fine cuts designed for safe work with the cuticles.Due to its delicacy, it will be perfect for removing hybrid and gel manicures.The shape of the cutter also allows you to lift the nails growing down during the gel correction without worrying about hurting the hyponychium.It will be perfect for removing hybrid and gel manicure.
€29.90
MANI KING Cleaner 1L
MANI KING Cleaner 1L
The cleaner is perfect for degreasing the nail plate after it has been dulled - it is enough to wipe the plate with a dust-free cotton swab soaked in the cleanser to prepare the nails for the application of the primer, base and varnish.You can also use the cleaner at the end of the manicure to remove the dispersion layer left over from the previously used products.      Attention
The preparation may cause irritation to the eyes, skin and respiratory system. In case of irritation - rinse with plenty of water and consult a doctor. Store in a dry, cool place. Protect against sunlight. Keep away from children. The product is for professional use only.Use in well-ventilated rooms.Do not use on irritated skin.
€8.50
MANI KING Ceramic cutter CB007 - cone , F
MANI KING Ceramic cutter CB007 - cone , F
A delicate ceramic cutter designed mainly for removing the hybrid mass without damaging the natural nail. It is also perfect for removing the remains of gel or acrylic from the natural nail plate so as not to damage it. It is also suitable for the development of gel and acrylic stylizations. It does not transfer heat to the nail plate. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensionsPin diameter: 2.35 mm (universal)Length 50mmWorking part: 14 x 6.5mmSharpness level: gentle
€4.99
MANI KING Ceramic cutter CB007 - cone , M
MANI KING Ceramic cutter CB007 - cone , M
Medium grit ceramic cutter, designed mainly for removing gel and acrylic mass. Also ideal for developing gel or acrylic stylizations. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. It does not transfer heat to the nail plate. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensionsPin diameter: 2.35 mm (universal)Length 50mmWorking part: 14 x 6.5mmSharpness level: medium
€4.99
MANI KING Ceramic cutter CB007 - cone , XF
MANI KING Ceramic cutter CB007 - cone , XF
A very delicate ceramic cutter designed mainly for removing the hybrid mass without damaging the natural nail. It is also perfect for removing the remains of gel or acrylic from the natural nail plate so as not to damage it. It does not transfer heat to the nail plate. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensionsPin diameter: 2.35 mm (universal)Length 50mmWorking part: 14 x 6.5mmSharpness level: very delicate
€4.99
MANI KING CB029 ceramic cutter - cone, F
MANI KING CB029 ceramic cutter - cone, F
The ceramic cutter gently removes the mass without causing vibrations. Very thoroughly removes dead skin. Ideal for quick and safe removal of hybrid varnish, gel or acrylic residues, without damaging the nail plate. It is also great for developing gel or acrylic mass. It does not transfer heat and does not cause an unpleasant burning sensation.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions:Pin diameter: 2.35 mm (universal)Length 51mmWorking part: 15 x 6mmSharpness level: gentle
€4.99
MANI KING CB030 ceramic cutter - pointed, M
MANI KING CB030 ceramic cutter - pointed, M
Ceramic cutter in the shape of a thin point. Very precise and multifunctional.It will easily cope with the unnecessary amount of gel or acrylic in hard-to-reach places, near the cuticles. Medium gradation cutter, designed mainly for removing gel and acrylic mass. Also ideal for developing gel or acrylic stylizations. Cutter made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. It does not transfer heat to the nail plate. Durable, provides comfort during manicure and pedicure treatments.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensionsPin diameter: 2.35 mm (universal)Length 51mmWorking part: 14 x 7mmSharpness level: medium
€4.99
MANI KING CB002 ceramic cutter - point, C
MANI KING CB002 ceramic cutter - point, C
A thin, very precise cutter used to perform manicures and pedicures. Designed for advanced stylists. It does not transfer heat to the nail plate. Slow speed, made of zirconium oxide. Light, resistant to all kinds of cracks and mechanical damage. Durable, provides comfort during manicure and pedicure treatments, but also during podiatry treatments.Suitable for removing calluses.The cutter is suitable for disinfection and sterilization. Does not sensitize. Fits any twist and lock milling machineDimensions:Pin diameter: 2.35 mm (universal)Length 39mmWorking part: 14mmSharpness level: strong
€4.99
Afinia Wave cosmetic lamp
Out-of-Stock
Afinia Wave cosmetic lamp
Illuminate your living room for the summer and enjoy extraordinary comfort thanks to Afinia Wave. Our Afinia Wave beauty lamp not only offers a soft and gentle light for the eyes, but also gives you full control over the lighting. By adjusting the light intensity, you can adjust the lighting to your preferences. Its unique design will perfectly fit into modern spaces, and full 180-degree lighting without shadows and high quality LEDs mean that no detail will escape your attention. In addition, the Afinia Wave lamp is perfect for taking photos of your projects, highlighting every detail.
Advantages :     ◉ Soft, eye-friendly light – for maximum comfort     ◉ Perfectly reproduces natural colors - you have everything under control     ◉ Unique design - the lamp fits perfectly into modern spaces      ◉The ability to freely adjust the light intensity (dimming)     ◉ Perfect for taking photos of your projects - soft light cast from above will perfectly emphasize every detail     ◉ The lamp does not generate heatSpecification :     ◉ Full 180 degree illumination, no shadowing     ◉ Stable frame with 300 LEDs with a lifetime of up to 50,000 hours hours of operation, and with a light intensity of 2520 lumens, it allows you to see every detail     ◉ Dimensions: width 75 cm, height 36 cm
3-pack of drill bits Home Spa Gold 13
Out-of-Stock
3-pack of drill bits Home Spa Gold 13While using this drill bits you can easily and precisely remove old stylings and cuticles. Drill bits pack Home Spa Gold contains three drill bits with golden ZRN coating, which guarantees:    ◉ minimizing the overheating effect of the nail surface,    ◉ better biocompatibility of the drill bit – recommended for people who are allergic to metals,    ◉ longer service life of the drill bit, more economical work,    ◉ higher resistance to all sterilants,This drill bits were made of stainless steel and can be autoclaved. They are suitable for both wet and dry work.Remember that any instrument you use must be properly cleaned and sterilized before first use and before each subsequent use.
Pink 3 - Drill Bit long, truncated cone IQNAILS 14
Pink 3 - Drill Bit long, truncated cone IQNAILS 14
Diamond cutter 173.524.021 - long, truncated cone, with a collecting grit.         ◉ cleaning the nail plate         ◉ push back and push back cuticles         ◉ pre-removal of epithelium         ◉ cleaning the periungual shafts         ◉ matting of the natural nail plate         ◉ smoothing the gap between the natural nail plate and the built styling         ◉ will perfectly replace the pusher         ◉ the blue color of the bar means fast and effective work
€9.90
Diamond drill bit for cuticles, medium – flat end taper IQNAILS 15
Diamond drill bit for cuticles, medium – flat end taper IQNAILS 15
Cosmetic cutter - diamond 172.524.025 with standard grit. It is suitable for both "dry" and water-cooled operation.Nail, cuticle and foot cutter: truncated cone.     ◉ manicure cutter with "under the cuticles" effect     ◉ cleaning the underside of the free edge of the nail plate and the side periungual folds     ◉ matting of the natural nail plate     ◉ dulling of the tip threshold     ◉ in podiatry - ideal for treating fissures on the heels, removing thickened or calloused cuticles and nails     ◉ can be sterilized in an autoclave
€9.90