Gel polish Color №01 - 13ml LUNAMOON
The perfect pigmented gel polish, which applies smoothly in one or two thin coats. It doesn't streak during application and easily self-levels. It has a medium-thick consistency.Application method:    ◉ After leveling with the base/gel, remove the stickiness.    ◉ Apply the gel polish (1-2 thin coats). Load the brush with the material, paint the center of the nail, then the side walls. Use a brush for fine lines to approach the cuticle. The first layer should always be semi-transparent.    ◉ Cure for 60 seconds.    ◉ Check with an orangewood stick if everything is dry.    ◉ Apply the top coat and cure in the lamp for 60 seconds. After curing, don’t wipe anything off, as it may dull the shine.(Product images on the website may differ from the actual product)

Nail file 180/240 WINGS STANDARD FLAMINGI Aba Group
Product specification :
Shape : WINGS .Gradation : 100/180Thickness : STANDARDVersion : Without packaging .
Nail file Aba Group WINGS 180/240 STANDARD FLAMINGI gradation dedicated to hard-to-reach places and for professional use. The file is intended for natural and artificial nails, with gel and acrylic mass. Recommended for treatments that require effective and safe filing, shortening of nails, or for initial nail treatment.
180 is the most popular choice among stylists. The most versatile gradation will be successfully used for shortening nails, filing and developing the hybrid mass, as well as for leveling the gel mass.240 is the smallest gradation, recommended for the natural nail plate. It will gently smooth the free edge of the nail and give it the final shape, without fear of splitting the nail plate. In addition, it can be used as a polisher to dull the nail just before applying products.

Gel Polish Tape Bond Soak Off 8 ml VICTORIA VYNN
    Acid-free foundationA high-quality preparation that will easily degrease the nail plate, increasing the adhesion of hybrid, gel and acrylic gel products to the natural nail plate.The product can only be applied to an undamaged, natural nail plate, which does not show much difficulty with the adhesion of other manicure styling products.Features of Tape Bond:    ◉ increases the grip of styling    ◉ acid-free undercoat    ◉ replaces primer products    ◉ does not etch the plate    ◉ safe for natural nail plate    ◉ wait approx. 30 seconds before applying the base    ◉ leaves a sticky guard
Directions for use :◉ Apply Tape Bond on the surface of the nail, which is degreased and matted with the preparation◉ The preparation should be applied in a minimal amount only to the natural, matted and degreased nail plate.◉ The preparation cannot be used directly on the skin. Before proceeding to the next stages of styling, wait for the preparation to evaporate from the nail plate.
Capacity : 8ml

Acetone hybrid varnish remover (acetone) Semilac 50 ml
Acetone Semilac is used to remove hybrid varnish from nails.
To remove the hybrid varnish, file the top layer of varnish, soak the swab with acetone and wrap it with aluminum foil.
Leave for 8-10 minutes and so soaked varnish can be easily removed from the nail plate.
APPLICATION OF ACETONE :If you want to remove the hybrid varnish with Semilac Acetone, first of all, gently matt the top layer with a polishing block or a 180/240 file. In the next step, you will need special films - Semilac Remover Wraps, which will significantly facilitate the process of soaking the hybrid.Each foil has a dust-free swab that should be soaked in acetone, then applied to each nail and wrapped in foil.Nails should remain wrapped in foil for about 10-15 minutes. After the specified time, the foil should be removed and the remains of the varnish removed with a pusher.

Gel polish Color №02 - 13ml LUNAMOON
The perfect pigmented gel polish, which applies smoothly in one or two thin coats. It doesn't streak during application and easily self-levels. It has a medium-thick consistency.Application method:    ◉ After leveling with the base/gel, remove the stickiness.    ◉ Apply the gel polish (1-2 thin coats). Load the brush with the material, paint the center of the nail, then the side walls. Use a brush for fine lines to approach the cuticle. The first layer should always be semi-transparent.    ◉ Cure for 60 seconds.    ◉ Check with an orangewood stick if everything is dry.    ◉ Apply the top coat and cure in the lamp for 60 seconds. After curing, don’t wipe anything off, as it may dull the shine.(Product images on the website may differ from the actual product)

Nail file 180/240 HALF MOON STANDARD FLAMINGI Aba Group 
Product specification :
Shape : HALF MOON .Gradation : 180/240 .Thickness : STANDARD.Version : Without packaging .
Nail file Aba Group HALF MOON 180/240 STANDARD FLAMINGI gradation dedicated to hard-to-reach places and for professional use. The file is intended for natural and artificial nails, with gel and acrylic mass. Recommended for treatments that require effective and safe filing, shortening of nails, or for initial nail treatment.
180 is the most popular choice among stylists. The most versatile gradation will be successfully used for shortening nails, filing and developing the hybrid mass, as well as for leveling the gel mass.240 is the smallest gradation, recommended for the natural nail plate. It will gently smooth the free edge of the nail and give it the final shape, without fear of splitting the nail plate. In addition, it can be used as a polisher to dull the nail just before applying products.

NAIL PREP 15 ml VICTORIA VYNN Preparation for degreasing
A professional preparation for degreasing nails.
◉ strong degreasing preparation◉ prepares natural nails for the following styling: hybrid, gel or acrylic◉ increases the adhesion of the natural nail plate with each styling◉ has antifungal and antiseptic properties◉ aligns the ph of the plate◉ removes moisture and dirt from the natural nail plate◉ application only on the natural nail plate, before the Tape Bond layer◉ wait 30 seconds after applying
APP :◉ Only for natural tile.◉ Before applying Tape Bond.◉ After applying, wait 30 seconds.◉ Use 2 times on the problematic plate.HOW TO USE :◉ Roughen the natural plate with a polishing block.◉ Clean dust thoroughly with a brush.◉ Apply a small amount of the preparation with a brush.◉ Wait about 30 seconds for it to evaporate.
Capacity : 15 ml

Remover for hybrid varnish (Remover) Semilac Remover 500 ml
A specialized liquid for removing hybrid varnish.
The innovative formula was designed to protect the natural nail plate.
Lanolin contained in it provides adequate hydration and protects against drying of the nails and cuticles.
APPLICATION OF REMOVER :Application If you want to remove the hybrid varnish with Semilac Remover, first of all, gently matt the top layer with a polishing block or file with a 180/240 gradation. In the next step, you will need special films - Semilac Remover Wraps, which will significantly facilitate the process of soaking the hybrid. there is a dust-free cotton swab, which should be soaked in Semilac Remover, then applied to each nail and wrapped with foil.The nails should remain wrapped with foil for about 10-15 minutes. After the specified time, the foil should be removed and the remains of the varnish removed with a pusher.

Gel polish Color №03 - 13ml LUNAMOON
The perfect pigmented gel polish, which applies smoothly in one or two thin coats. It doesn't streak during application and easily self-levels. It has a medium-thick consistency.Application method:    ◉ After leveling with the base/gel, remove the stickiness.    ◉ Apply the gel polish (1-2 thin coats). Load the brush with the material, paint the center of the nail, then the side walls. Use a brush for fine lines to approach the cuticle. The first layer should always be semi-transparent.    ◉ Cure for 60 seconds.    ◉ Check with an orangewood stick if everything is dry.    ◉ Apply the top coat and cure in the lamp for 60 seconds. After curing, don’t wipe anything off, as it may dull the shine.(Product images on the website may differ from the actual product)

Nail file 100/180 HALF MOON SLIM FLAMINGI Aba Group
Product specification :
Shape : Half MoonGradation : 100/180Thickness : SLIMVersion : Without packaging .
Aba Group HALF MOON Disposable nail file with 100/180 SLIM FLAMINGI  gradation dedicated to hard-to-reach places and for professional use. The file is intended for natural and artificial nails, with gel and acrylic mass. Recommended for treatments that require effective and safe filing, shortening of nails, or for initial nail treatment.
The 100 grit file is the right choice for processing, shortening and filing the gel mass.180 is the most popular choice among stylists. The most versatile gradation will be successfully used for shortening nails, filing and developing the hybrid mass, as well as for leveling the gel mass.

PRIMER ACID Victoria Vynn 15 ml
◉ The acid primer prepares the nail plate before applying the gel and acrylic mass◉ Equalizes the pH level, deacidifies and removes moisture◉ Recommended for the so-called difficult nails with a high degree of lubrication◉ Increases the adhesion of the styling to the nail plate. How to use Primer Acid ? ◉ After preparing the plate, roughen the whole thing with a polishing block.◉ Then wipe with a Cleaner.◉ Apply Primer only to the natural nail plate, avoiding the cuticle area.◉ Apply to the nail in spots. The preparation itself should "spread" over the plate.◉ Wait until it has completely evaporated.◉ After evaporation, you can apply a hybrid, gel or acrylic base.
Capacity: 15ml

Remover for hybrid varnish (Remover) Semilac Remover 125 ml
Acetone Semilac is used to remove hybrid varnish from nails. To remove the hybrid varnish, file the top layer of varnish, soak the swab with acetone and wrap it with aluminum foil. Leave for 8-10 minutes and so soaked varnish can be easily removed from the nail plate.
A specialized liquid for removing hybrid varnish. The innovative formula was designed to protect the natural nail plate. Lanolin contained in it provides adequate hydration and protects against drying of the nails and cuticles.
APPLICATION OF REMOVER :Application If you want to remove the hybrid varnish with Semilac Remover, first of all, gently matt the top layer with a polishing block or file with a 180/240 gradation. In the next step, you will need special films - Semilac Remover Wraps, which will significantly facilitate the process of soaking the hybrid. there is a dust-free cotton swab, which should be soaked in Semilac Remover, then applied to each nail and wrapped with foil.The nails should remain wrapped with foil for about 10-15 minutes. After the specified time, the foil should be removed and the remains of the varnish removed with a pusher.