Nail Dust Collector Afinia NDC Mobile+
Mobile nail dust collectorA portable, light and small dust collector was created at the request of many nail stylists. The efficiency of the device is comparable to its stationary version. Here, too, we have used replaceable filters that guarantee dust retention and hygiene. If you want to use the absorber to move with it - this is the perfect solution for you.
Advantages :      ◉ High quality professional portable dust collector     ◉ Even better absorption effect     ◉ Very effective and ergonomic housing     ◉ Replaceable filters     ◉ Portable, lightweight and small dust collector weighing 2.3kg     ◉ Power comparable to stationary absorbers     ◉ Low noise level

Acetone hybrid varnish remover (acetone) Semilac 50 ml
Acetone Semilac is used to remove hybrid varnish from nails.
To remove the hybrid varnish, file the top layer of varnish, soak the swab with acetone and wrap it with aluminum foil.
Leave for 8-10 minutes and so soaked varnish can be easily removed from the nail plate.
APPLICATION OF ACETONE :If you want to remove the hybrid varnish with Semilac Acetone, first of all, gently matt the top layer with a polishing block or a 180/240 file. In the next step, you will need special films - Semilac Remover Wraps, which will significantly facilitate the process of soaking the hybrid.Each foil has a dust-free swab that should be soaked in acetone, then applied to each nail and wrapped in foil.Nails should remain wrapped in foil for about 10-15 minutes. After the specified time, the foil should be removed and the remains of the varnish removed with a pusher.

Afinia Wave cosmetic lamp
Illuminate your living room for the summer and enjoy extraordinary comfort thanks to Afinia Wave. Our Afinia Wave beauty lamp not only offers a soft and gentle light for the eyes, but also gives you full control over the lighting. By adjusting the light intensity, you can adjust the lighting to your preferences. Its unique design will perfectly fit into modern spaces, and full 180-degree lighting without shadows and high quality LEDs mean that no detail will escape your attention. In addition, the Afinia Wave lamp is perfect for taking photos of your projects, highlighting every detail.
Advantages :     ◉ Soft, eye-friendly light – for maximum comfort     ◉ Perfectly reproduces natural colors - you have everything under control     ◉ Unique design - the lamp fits perfectly into modern spaces      ◉The ability to freely adjust the light intensity (dimming)     ◉ Perfect for taking photos of your projects - soft light cast from above will perfectly emphasize every detail     ◉ The lamp does not generate heatSpecification :     ◉ Full 180 degree illumination, no shadowing     ◉ Stable frame with 300 LEDs with a lifetime of up to 50,000 hours hours of operation, and with a light intensity of 2520 lumens, it allows you to see every detail     ◉ Dimensions: width 75 cm, height 36 cm

Remover for hybrid varnish (Remover) Semilac Remover 500 ml
A specialized liquid for removing hybrid varnish.
The innovative formula was designed to protect the natural nail plate.
Lanolin contained in it provides adequate hydration and protects against drying of the nails and cuticles.
APPLICATION OF REMOVER :Application If you want to remove the hybrid varnish with Semilac Remover, first of all, gently matt the top layer with a polishing block or file with a 180/240 gradation. In the next step, you will need special films - Semilac Remover Wraps, which will significantly facilitate the process of soaking the hybrid. there is a dust-free cotton swab, which should be soaked in Semilac Remover, then applied to each nail and wrapped with foil.The nails should remain wrapped with foil for about 10-15 minutes. After the specified time, the foil should be removed and the remains of the varnish removed with a pusher.

Shadowless LED cosmetic lamp Afinia Flexi
The problem of underexposure of the hand during the procedure?Bothersome shadows, unsightly styling photos?Each of these problems can be solved by the Afinia Flexi shadow-free LED cosmetic lamp!Our latest FLEXI lamp is a practical option for accurate lighting of a cosmetic desk.With her, you can make styling precisely and comfortably, and the possibility of matching the lamp will also make it easier for you to take beautiful photos of styling!
   ◉ 58 cm long panel, equipped with 117 LED points and a switch that also serves to adjust the light intensity.   ◉ 4 light intensity modes: 100, 75, 50, 25%   ◉ LED points at the level of 5600 ≈ 6000 k   ◉ The arm, adjustable in 2 places, will allow you to direct the light according to individual needs.   ◉ The lamp is attached to the table top with the clamp included in the set.   ◉ power (W): 24W (117 LED points)   ◉ input voltage (VAC): 100-240V   ◉ operating voltage (VDC): 27.5V   ◉ lux lighting (lux / 40cm): 2480 Lux   ◉ luminous flux (lumen): 2200lm   ◉ Correlated Color Temperature (CCT): 5500k ~ 6000k   ◉ color rendering index (CRI): RA> 80   ◉ energy efficiency class: A   ◉ material: PS + ABS + IRON   ◉ type of power supply: mains adapter   ◉ working temperature (C °): -5 ° C ~ 40 ° C   ◉ service life: about 30,000 hours

Remover for hybrid varnish (Remover) Semilac Remover 125 ml
Acetone Semilac is used to remove hybrid varnish from nails. To remove the hybrid varnish, file the top layer of varnish, soak the swab with acetone and wrap it with aluminum foil. Leave for 8-10 minutes and so soaked varnish can be easily removed from the nail plate.
A specialized liquid for removing hybrid varnish. The innovative formula was designed to protect the natural nail plate. Lanolin contained in it provides adequate hydration and protects against drying of the nails and cuticles.
APPLICATION OF REMOVER :Application If you want to remove the hybrid varnish with Semilac Remover, first of all, gently matt the top layer with a polishing block or file with a 180/240 gradation. In the next step, you will need special films - Semilac Remover Wraps, which will significantly facilitate the process of soaking the hybrid. there is a dust-free cotton swab, which should be soaked in Semilac Remover, then applied to each nail and wrapped with foil.The nails should remain wrapped with foil for about 10-15 minutes. After the specified time, the foil should be removed and the remains of the varnish removed with a pusher.

Nail Dust Collector AFINIA NDC 2000
    ◉ High-quality professional dust collector    ◉ The device is made of white HIPS polystyrene    ◉ Removable filter    ◉ Grille diameter: 169 mm     Included :      ◉ ventilation grille (identical for NDC 1000 and NDC 2000)    ◉ polyester filter    ◉ mounting materialsDevice dimensions :       ◉ 524 x 347 x 124mm (length x width x height)    ◉ Device weight: 4 kg    ◉ Dust absorption capacity: 300 m³ / h    ◉ Power consumption: 100 W    ◉ Warranty period: 2 years

Remover for hybrid varnish (Remover) Semilac Remover 50 ml
A specialized liquid for removing hybrid varnish.
The innovative formula was designed to protect the natural nail plate.
Lanolin contained in it provides adequate hydration and protects against drying of the nails and cuticles.
APPLICATION OF REMOVER :Application If you want to remove the hybrid varnish with Semilac Remover, first of all, gently matt the top layer with a polishing block or file with a 180/240 gradation. In the next step, you will need special films - Semilac Remover Wraps, which will significantly facilitate the process of soaking the hybrid. there is a dust-free cotton swab, which should be soaked in Semilac Remover, then applied to each nail and wrapped with foil.The nails should remain wrapped with foil for about 10-15 minutes. After the specified time, the foil should be removed and the remains of the varnish removed with a pusher.

Electric nail drill MARATHON 3 CHAMPION WHITE
Electric drill MARATHON 3 CHAMPION  is a professional cosmetic device, which is designed to facilitate and improve, and as a result, speed up the work of nail stylist.
The MARATHON 3 CHAMPION professional milling machine is intended primarily for work in beauty salons, but also for home use. Small dimensions and intuitive operation make working on it a real pleasure.
   ◉ A professional electric drill designed to work in beauty salons   ◉ Base dimensions: 156 x 118 x x 78 mm (length x width x height)   ◉ Base weight: 1.25 kg   ◉ Power consumption: 45 W   ◉ Input voltage: 110 - 220 V   ◉ Warranty period: 12 months

Primer Semilac 7 ml
Acid primer is a preparation for degreasing the plate intended for people who have big problems with adhesion of the base to the nails.
Nail primer is one of the most important formulations affecting the durability of both  hybrid, gel and acrylic styling. It degreases the nail plate and changes its pH, which significantly increases the adhesion of the base and affects the durability of the whole stylization. It prevents intrusion and helps to solve problems with durability, even in the case of problematic tiles.We can distinguish two types of primer - acidic primer and Acid free primer. What's different? When and how to use them? In today's post we will try to dispel any doubts.
It should be applied after preparing the tile and degreasing it. Then use a brush to apply a drop to the center of the plate and wait until the product spills over its area by itself, trying to avoid contact with the skin. It can be used under gels, acrylics and hybrids. The preparation must self dry before applying the next coat. After its application, the applied cosmetic lasts longer. Store it at room temperature.
Apply Primer only on the natural nail plate, avoiding the skin area. 
Acid Primer: we apply 1-2 small droplets on the nail. The preparation should disperse itself on the plate. We wait until the product is completely evaporated from the plate

Primer Acid Free Semilac 7 ml
The acid-free Semilac Primer for degreasing nails increases the adhesion of the base and improves the durability of the manicure on problematic nail plates.
Nail Primer Acid Free  is one of the most important formulations affecting the durability of both  hybrid, gel and acrylic styling. It degreases the nail plate and changes its pH, which significantly increases the adhesion of the base and affects the durability of the whole stylization. It prevents intrusion and helps to solve problems with durability, even in the case of problematic tiles.We can distinguish two types of primer - acidic primer and Acid free primer. What's different? When and how to use them? In today's post we will try to dispel any doubts.
It should be applied after preparing the tile and degreasing it. Then use a brush to apply a drop to the center of the plate and wait until the product spills over its area by itself, trying to avoid contact with the skin. It can be used under gels, acrylics and hybrids. The preparation must self dry before applying the next coat. After its application, the applied cosmetic lasts longer. Store it at room temperature.
Apply Primer only on the natural nail plate, avoiding the skin area.
Acid Primer: we apply 1-2 small droplets on the nail. The preparation should disperse itself on the plate. We wait until the product is completely evaporated from the plate

Cartridge with polyester filter Afinia NDC 1000
The basis of the Afinia NDC 1000 Dust Collector is a filter that ensures that the sediment formed during nail plate styling remains inside the absorber.The most important element of the Afinia NDC 1000 Dust Collector is the filter cassette, which should be replaced according to the intensity and frequency of treatments. We recommend changing it every three months, but it's worth checking it constantly.You can choose the type of filter according to your preferences. We suggest that the carbon cartridge also absorbs odors.
A cassette with a polyester filter adapted to the Afinia NDC 1000 dust absorber.
The cassette must be replaced every 3 months .
Cassette dimensions :
L 225 x W 170 x H 33 mm